Bedienungsanleitung Parkside IAN 290733 PAMFW 12 B2 (Seite 24 von 90) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748023

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

PAMFW 12 B2

│

21 ■

Operation

Switching on and oﬀ

Switching on:

♦ Push the ON/OFF switch

forwards to switch

the appliance on.

The LED work light lights up when the appli-

ance is switched on to light up the working area

in low light conditions.

NOTE

► The LED work light

may only be used

without dust extraction unit .

Switching oﬀ:

♦ Push the ON/OFF switch

backwards to

switch the appliance oﬀ.

Select oscillation speed

♦ Use the speed adjustment wheel to set the

required oscillation speed.

Stage 1: low oscillation speed

Stage 6: high oscillation speed

NOTE

► The required speed depends on the material

being worked and on the working conditions

and can be determined through practical

tests.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always

switch the appliance oﬀ and remove

the battery before carrying out any

work on the appliance.

■ Do not use any sharp objects to clean the ap-

pliance. Never permit liquids to enter inside the

appliance. This can damage the appliance.

■ Clean the appliance regularly, preferably imme-

diately after completion of the work.

■ Use a soft, dry cloth to clean the housing.

Never use petrol, solvents or cleansers which

can damage plastic.

■ A vacuum cleaner is required for thorough

cleaning of the appliance.

■ Ventilation openings must never be obstructed.

■ Remove any adhering swarf with a brush.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

climate is cool and dry.

NOTE

► Replacement parts not listed (such as carbon

brushes, switches and replacement batteries)

can be ordered via our service hotline.

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from

the date of purchase. If this product has any faults,

you, the buyer, have certain statutory rights. Your

statutory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The validity period of the warranty starts from the

date of purchase. Please keep your original receipt

in a safe place. This document will be required as

proof of purchase.

If any material or production fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

at our discretion. This warranty service is depend-

ent on you presenting the defective appliance and

the proof of purchase (receipt) and a short written

description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair

or replacement of a product does not signify the

beginning of a new warranty period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 290733 PAMFW 12 B2 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info