Bedienungsanleitung Parkside IAN 290795 PTSS 1200 B1 (Seite 21 von 92) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748038

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

PTSS 1200 B1

■ 18

│

c) If you want to restart a saw that is still in the

workpiece, centre the saw blade in the cut

and check to ensure that the teeth are not

caught anywhere in the workpiece. If the saw

blade catches it can jump out of the workpiece

or cause a kickback when the saw is restarted.

d) Support large panels or boards to reduce the

risk of the saw blade jamming and causing

a kickback. Large panels tend to bend under

their own weight. Panels must be supported on

both sides, in the vicinity of the saw cut and

also at the edge.

e) Do not use blunt or damaged saw blades.

Saw blades with blunt or misaligned teeth may

cause excessive friction as the saw cut is too

narrow, and this can cause a saw blade jam

and kickback.

f) Blade depth and bevel adjusting locking

levers must be tight and secure before making

cut. If the settings change while sawing, the

saw blade might jam and cause a kickback.

g) Be particularly careful when sawing in

existing walls or other obscured areas. The

inserted saw blade could get caught on hidden

objects and cause a kickback.

Function of the blade guard

a) B

efore every use, check to ensure that the

blade guard closes properly. Do not use the

saw if the blade guard does not move freely

and does not close immediately. Never clamp

or tie the blade guard into the open position. If

the saw accidentally falls to the ﬂoor, the blade

guard might bend. Ensure that the blade guard

moves freely and does not touch the saw blade

or other parts at all cutting angles or depths.

b) Check the operation of the blade guard

spring If the guard and the spring are not op-

erating properly, have the appliance serviced

before using it. Damaged parts, sticky deposits

or accumulations of chippings can cause the

blade guard to operate slowly.

c) When making a "plunge cut" which is not at

right angles, secure the saw base plate to

prevent any lateral movement. Lateral move-

ment can cause the saw blade to jam, thus

causing a kickback.

d) Do not leave the saw on the work bench or

ﬂoor if the blade guard is not fully covering

the saw blade. An unprotected, coasting saw

blade will move the saw in the opposite direc-

tion to the cutting direction and saw anything

in its path. Be aware of the time it takes for the

blade to stop after switch is released.

Supplementary notes

■ Do not use any grinding discs.

■ Use only saw blades with diameters corre-

sponding to the label on the saw.

WARNING! DANGER DUE TO DUST

EXPOSURE!

► When working for extended periods of time

on wood and, in particular, materials that

produce dust which is hazardous to health,

connect the appliance to an appropriate

external dust extraction appliance.

Wear protective gloves!

Wear a dust mask!

Wear safety goggles!

Wear ear protectors!

■ Do not allow the teeth of the saw blade to

overheat.

■ When sawing plastic, avoid melting the plastic.

WARNING! TOXIC FUMES!

► Working with the tool can produce harmful/

toxic dusts that represent a health hazard for

the person operating the appliance and for

any other people in the area.

■ Materials containing asbestos may not be pro-

cessed. Asbestos is a known carcinogen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 290795 PTSS 1200 B1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info