Bedienungsanleitung Parkside IAN 291874 PHKSA 20 Li A2 (Seite 23 von 117) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746778

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

PHKSA 20-Li A2

│

19 ■

Use only the following high-speed battery

charger to charge the cordless tool: PLG 20 A1*

INPUT:

Rated voltage: 230–240 V

, 50 Hz

(AC)

Rated power

consumption: 65 W

Fuse (internal): 3.15 A

T3.15A

OUTPUT:

Rated voltage: 21,5 V

(DC)

Rated current: 2.4 A

Charging time: approx. 60 min

Protection class: II /

(double insulation)

*BATTERY AND CHARGER ARE NOT INCLUDE

Noise emission value:

Noise measurement value determined in accord-

ance with EN 60745. The A-rated noise level of

the power tool is typically as follows:

Sound pressure level: L

= 75 dB(A)

Uncertainty K: K

= 3 dB

Sound power level: L

= 86 dB (A)

Uncertainty K: K

= 3 dB

Wear hearing protection!

Vibration emission value:

Total vibration values (vector total of three direc-

tions) determined in accordance with EN 60745:

Sawing wood a

h,W

= 1,9 m/s

Uncertainty K = 1.5 m/s

NOTE

► The vibration emission value and noise emis-

sion levels speciﬁed in these instructions have

been measured in accordance with the stand-

ardised testing procedure speciﬁed and can

be used to make equipment comparisons.

The speciﬁed vibration emission value and

the noise emission values can also be used to

make an initial load estimate.

WARNING!

► Depending on the manner in which the

power tool is being used and, in particular,

the kind of workpiece that is being worked,

the vibration and noise emission values can

deviate and may sometimes exceed the val-

ues given in these instructions. Regular use of

the power tool in this way may cause the user

to underestimate the vibration. Try to keep the

vibration loads as low as possible. Measures

to reduce the vibration load are, e.g. wearing

gloves and limiting the working time. Wherein

all states of operation must be included (e.g.

times when the power tool is switched oﬀ and

times where the power tool is switched on but

running without load).

General Power Tool

Safety Warnings

WARNING!

► Read all safety warnings and all instruc-

tions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre

and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ﬂam-

mable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 291874 PHKSA 20 Li A2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info