746861
15
Zoom out
Zoom in
Vorherige Seite
1/55
Nächste Seite
GB/IE/NI
15
Introduction/Safety instructions for pneumatic tools
Technical specifications
Air consumption: approx. 350 l/min
Operating pressure: 2–6.3 bar
Max. operating
pressure:
6.3 bar
Compressed air
connection:
¼” (6.35 mm)
Weight: approx. 465 g
Air supply: via maintenance unit
with filter pressure
regulator
Air quality required: Clean and
condensate-free
Compressors: with min. 50 l tank
volume
Detergent tank capacity: 750 ml
Flow rate: 3–4.5 l/min
Sound pressure level: 73 dB(A)
Sound power level: 85 dB(A)
General safety
instructions for
pneumatic tools
Note: The use of the term ‘pneumatic device’ or
‘device’ in the following text refers to the pneumatic
tools named in these operating instructions.
When pneumatic devices are
used, basic safety precautions must be taken in
order to avoid the risk of fire, electric shock or
personal injury. Before first using the product,
please ensure you read and follow these operating
instructions in full, and keep them in a safe place.
The manufacturer accepts no liability for losses,
damage or personal injury caused by a failure to
follow these operating instructions.
This device is not intended for use by individu-
als (including children) with impaired physical,
sensory or mental capacities or who lack
experience and/or knowledge of its use,
except in such cases where these individuals
are supervised by a person responsible for
their safety or these individuals have received
instruction from this person in the use of the
device.
Do not allow children to play with the device.
DANGER OF INJURY!
Shut off the compressed air supply before
performing maintenance.
EXPLOSION HAZARD!
Never use petrol or other flammable
liquids to clean the pneumatic device!Residual
fumes in the pneumatic device could be ignited
by sparks and cause the pneumatic device
to explode.Do not work with the device in
explosion hazard areas where combustible
liquids, gases or dusts are present.Never work
on materials which are or could potentially be
highly flammable or explosive.
Always use the device for the specific
applications for which it has been designed!
Do not overload the device.
Never use hydrogen, oxygen, carbon
dioxide or any other bottled gas as
the source of energy for this tool,
since this may cause an explosion and lead to
serious injury.
Maintain and clean the device regularly as
specified (see section ‘Care and cleaning’).
Before setup or first use, check the device for
any damage. Before use, always ensure that
the device is in perfect working order.
Stay focused while working! Unexpected
movements of the device can be hazardous.
Ensure good bodily posture during use. Ensure
that you are not likely to overreach or lose
your balance during use. This will make it
easier for you to control the pneumatic device
in unexpected situations.
Do not use any device if its switches are faulty.
A device that can no longer be switched on or
off is dangerous and must be repaired.
292186 Unterbodenpistole_content_LB8.indb 15 05.12.17 14:14
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 292186 PDSR 6.3 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info