Bedienungsanleitung Parkside IAN 292186 PDSR 6.3 A1 (Seite 18 von 55) (Deutsch, Englisch, Holländisch, Französisch)

746861

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

GB/IE/NI

 Using the gun for underbody

and cavity sealing

 Once the gun is properly connected, you can

pull the trigger to apply the sealing product.

 If you are spraying with an underbody

protection product, you can apply this directly

by using the

underbody nozzle. Point the

nozzle at the part of the underbody you want

to spray (approx. distance 15–20 cm) and

then pull the trigger.

 If you are spraying with a cavity sealant

product, first connect the cavity hose to the

underbody nozzle. To do so, simply screw the

hose to the connection thread on the under-

body nozzle. Insert the hose into the cavity

and then pull the trigger.

 After use

After completing work, always disconnect the

device from the compressed air

supply.

 Pull the trigger briefly to discharge any

compressed air still present in the device

 Now pull the locking mechanism on the con-

nection coupling on your compressed air hose

backwards. Now disengage the hose.

Take care when setting down

the device. Never set the device down so that it

ends up

lying on the trigger. In the worst case,

this could cause the device to switch itself back on

accidentally, which could result in a dangerous

situation.

 Care and cleaning

 Disconnect the compressed air supply.

 Clean the device with a damp cloth.

 Never use corrosive or aggressive detergents

for cleaning. Water and liquid soap are

recommended for cleaning.

 Warranty and service

information

Warranty from Creative Marketing

Consulting GmbH

We give you a warranty on this device of

3 years from the date of purchase. In the event of

product defects, you have legal rights against the

retailer of this product. Your statutory rights are not

affected in any way by our warranty conditions,

which are described below.

 Warranty conditions

The warranty period begins on the date of purchase.

Please retain the original sales receipt. This

document is required as your proof of purchase.

Should this product show any defect in materials

or manufacture within 3 years from the date of pur-

chase, we will repair or replace it – at our discretion

– free of charge. This warranty service requires that

you retain proof of purchase (sales receipt) for the

defective device for the three year period and that

you briefly explain in writing what the fault entails

and when it occurred.

If the defect is covered by our warranty, we will

repair and return your product or send you a

replacement. The original warranty period is not

extended when a device is repair or replaced.

 Extent of warranty

This device has been manufactured according to

strict quality guidelines and carefully inspected

before delivery.

The warranty applies to material and manufac-

turing defects only. This warranty does not cover

product parts that are subject to normal wear and

tear and can therefore be regarded as consuma-

bles, nor does it cover damage to fragile parts such

.../After use/Care and cleaning/Warranty and service information

292186 Unterbodenpistole_content_LB8.indb 18 05.12.17 14:14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 292186 PDSR 6.3 A1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info