746858
30
Zoom out
Zoom in
Vorherige Seite
1/117
Nächste Seite
GB/IE/NI30
Safety instructions for pneumatic tools
Never direct the air flow towards
yourself or any other person.
Thrashing hoses can cause griev-
ous injury. So always check that
the hoses and their fasteners
are undamaged and have not
detached.
Locking pins must be used on
universal swivel (jaw) couplings.
Whipcheck hose fasteners must be
used as protection against a fail-
ing hose–machine and hose–hose
connector.
Make sure that the maximum
pressure specified on the machine
is not exceeded.
Never carry pneumatic machines
by their hoses.
Use the device only for applica-
tions it has been designed for!
Do not overload the device.
Never use bottled hydrogen,
oxygen, carbon dioxide, or
other gases as an energy source:
these can cause explosions and
therefore serious injury.
DANGER! Keep your hands
and limbs away from rotating
parts. Otherwise, there is
danger of injury.
Make sure that the motor oil
SAE 10-20 is applied correctly
for the optimal lubrication of the
pneumatic device (see Section
“Operation” on page 31).
Contact with eyes or skin can
cause inflammation or irritation.
It is therefore important that the
motor oil is applied with great
care into the compressed air con-
nection on the pneumatic devices.
Warnings specific to the
pneumatic angle grinder
Before fitting a parting disc, after
every tool repair, and before
the first use of an angle grinder,
always check the speed dial and
make sure
that the angle grinder’s
actual idle speed at 6.3 bar does
not exceed the speed stamped or
printed on the type plate. Further-
more, all angle grinders in use
must be examined at least once
a shift.
Make sure that the parting disc
has been fitted correctly and
the parting disc nut tightened
securely. The parting disc should
not sit too tightly or too loosely.
Check that the speed specified
on the parting disc is at least
equal to the rated speed of the
pneumatic angle grinder.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 292193 PDTS 6.3 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info