Bedienungsanleitung Parkside IAN 292200 PMTS 180 A1 (Seite 24 von 102) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746844

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

PMTS 180 A1

│

21 ■

g) Support large workpieces to reduce the risk

of the cutting disc jamming and causing a

kickback. Large workpieces can bend under

their own weight. The workpiece must be sup-

ported on both sides, namely in the vicinity of

the cut, and also at the edge.

Further safety instructions for

abrasive cutters

■ Never stand on an electrical appliance.

Serious injuries can occur if the electrical appli-

ance tips over or if you inadvertently come into

contact with the cutting disc.

■ Always use the protective cover. A protective

cover protects the user against parts of the

cutting disc which have broken oﬀ and also

against unintentional contact with the cutting

disc.

■ Ensure that the protective cover is working

properly and that it can move freely. Never

clamp the protective cover when it is in the open

position.

■ Use the appliance only for dry cutting.

Water entering a power tool will increase the

risk of electric shock.

■ Keep the power cable away from any rotat-

ing accessories. The power cable can be cut

through or caught up.

■ Keep handles dry, clean and free from oil

and grease. Greasy, oily handles are slippery

and result in loss of control.

■ Never remove cutting leftovers, metal swarf

etc. from the cutting area while the power

tool is running. Always place the tool arm in

the idling position and switch the power tool oﬀ.

■ Always switch on the power tool before ap-

plying it to the workpiece. Otherwise, there

is a danger of kickback if the cutting disc be-

comes caught up in the workpiece.

■ Only use the power tool if the working surface

is free of all adjusting tools, metal swarf etc.

except for the workpiece to be processed.

Small pieces of metal or other objects which

come into contact with the rotating cutting disc

can hit the operator at high speed.

■ Always clamp the workpiece to be processed

ﬁrmly. Never use workpieces which are too

small to clamped ﬁrmly. The distance between

your hand and the rotating cutting disc is other-

wise too small.

■ If the cutting disc jams, switch the power tool

oﬀ and wait until the cutting disc has com-

pletely stopped turning. Never attempt to pull

a rotating cutting disc out of a cut. This could

lead to a kickback. Identify and remove the

cause of the jam.

■ Do not apply lateral pressure to try and slow

the cutting disc down after switching oﬀ the

appliance. The cutting disc might be damaged,

break or cause a kickback.

■ Never ram the cutting disc into the workpiece

forcefully, and never apply too much force

when using a power tool. You should espe-

cially avoid jamming the cutting disc when

working on corners, sharp edges etc. If the

cutting disc is damaged by misuse, it can form

cracks that result in sudden breakage.

■ Wear a safety apron. Ensure that nobody

can be endangered by ﬂying sparks. Remove

all ﬂammable material from the vicinity.

Grinding metal creates ﬂying sparks.

■ Only use the abrasive cutter for materials

speciﬁed in the instructions for proper use.

Otherwise, the abrasive cutter can be over-

loaded.

■ Never use any damaged, non-circular or

vibrating cutting discs. Damaged cutting discs

cause increased friction, jamming of the cutting

disc and kickback.

■ Always use cutting disks of the correct size

and with an appropriate central ﬁxing bore

(e.g. diamond-shaped or circular). Cutting

disks which do not match the ﬁtting parts on the

abrasive cutter will run eccentrically and cause

loss of control.

■ Do not use chains or toothed saw blades.

Such accessories often cause a kickback or loss

of control over the power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 292200 PMTS 180 A1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info