Bedienungsanleitung Parkside IAN 298550 PHSSA 12 Li A1 (Seite 23 von 112) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748037

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

IEGB

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, tak-

ing into account the working

conditions and the work to be

performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) CAREFUL HANDLING AND USE

OF BATTERY DEVICES

a) Charge the batteries only in

chargers that are recommended

by the manufacturer. Risk of re if a

charger that is suitable for a specic type

of battery is used with other batteries.

b) In the power tools, use only the

batteries designed for the pur-

pose. The use of other batteries may

result in injuries and risk of re.

c) Keep the unused battery away

from paper clips, coins, keys,

nails, screws and other small

metal objects, which could

cause bridging of the contacts.

A short circuit between the battery

contacts may cause burns or re.

d) If used incorrectly, liquid may

leak from the battery. Avoid

contact with this. In the event

of accidental contact, rinse off

with water. If the liquid gets

into eyes, seek medical as-

sistance. Leaking battery uid may

cause skin irritations or burns.

6) SERVICE

Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

7) SPECIAL SAFETY DIRECTIONS

FOR BATTERY-OPERATED TOOLS

a) Ensure that the device is

switched off before inserting

the battery. Inserting a battery into

a power tool that is switched on may

result in accidents.

b) Recharge the batteries indoors

only because the battery charger

is designed for indoor use only.

c) To reduce the electric shock

hazard, unplug the battery

charger from the mains before

cleaning the charger.

d) Do not subject the battery to

strong sunlight over long pe-

riods and do not leave it on a

heater. Heat damages the battery

and there is a risk of explosion.

e) Allow a hot battery to cool be-

fore charging.

f) Do not open up the battery and

avoid mechanical damage to the

battery. Risk of short circuit and fumes

may be emitted that irritate the respirato-

ry tract. Ensure fresh air and seek medi-

cal assistance in the event of discomfort.

g) Use the additional handles de-

livered with the appliance. The

loss of control can result in injuries.

h) Hold the appliance by the insu-

lated gripping surfaces when

performing work in which the

tool may come into contact with

hidden wiring. Contact with a live

wire can also cause a charge in metal

parts of the appliance and result in an

electric shock.

i) Hold the device by the insulated

gripping surfaces when per-

forming work in which the cut-

ting tool may come into contact

with hidden wiring or its own

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 298550 PHSSA 12 Li A1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info