Bedienungsanleitung Parkside IAN 300488 PDFP 500 C3 (Seite 17 von 73) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748054

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

PDFP 500 C3

■ 14 │ GB│IE

Safety instructions for ﬁne spray

systems

■Keep your work area clean, well lit and free

of paint and solvents, cloths and other inﬂam-

mable materials. Possible risk of spontaneous

combustion. Have a fully-functioning ﬁre extin-

guisher available at all times.

■Ensure adequate ventilation in the spray zone

and suﬃcient fresh air in the entire room.

Evaporation of ﬂammable solvents will cause

an explosive environment.

■Do not spray or clean with materials whose

ignition point is lower than 21°C. Use mater-

ials based on water, non-volatile hydrocarbons

or similar materials. The evaporation of volatile

solvents will cause an explosive environment.

■Do not spray near ignition sources such as

static electric sparks, open ﬂames, ignition

ﬂames, hot items, motors, cigarettes and

sparks caused by plugging in/unplugging

power cables or by operating switches. These

ignition sources could cause a ﬁre to ignite in

the environment.

■Do not spray any material if you do not know

whether it is potentially dangerous. Unknown

materials could cause dangerous conditions.

■Wear additional personal protective equip-

ment such as suitable gloves and a protective

mask/respirator when spraying or handling

chemicals. Wearing appropriate protective

equipment for the conditions reduces your

exposure to dangerous substances.

■Do not spray yourself, other people or animals.

Keep your hands and other body parts out

of the spray jet. If the spray jet pierces the

skin, seek medical assistance immediately. The

sprayed material can even penetrate through a

glove and into the skin and thus into your body.

■Do not treat such a penetration injury like a

normal cut. A high-pressure jet can inject toxic

materials into the body and cause serious in-

juries. In the event of a chemical penetration of

the skin, seek medical assistance immediately.

■Be aware of the potential hazards of the

sprayed material. Take note of the markings

on the container and the manufacturer's infor-

mation on the sprayed material, including the

instruction to use personal protective equip-

ment. The manufacturer's instructions are to

be followed to reduce the risk of ﬁre or injuries

caused by poisons, carcinogens, etc.

■Never spray without the nozzle head ﬁtted.

Using a special nozzle with the appropriate

nozzle head reduces the likelihood of high-

pressure jets piercing the skin and injecting

poisons into your body.

Operation

HVLP properties

This appliance has a HVLP system (high volume,

low pressure). This ensures increased material

(paint) application and lower consumption.

IMPORTANT: Do not exceed the maximum working

pressure of 3 bar.

Connecting the device

■ The product may only be operated using

cleaned, condensate- and oil-free compressed

air and may not exceed the maximum operating

pressure of 3 bar on the appliance.

■ To ensure that you can regulate the air pressure,

the compressed air source should be equipped

with a (ﬁlter) pressure reducer.

You will need a ﬂexible compressed air hose

with a quick-disconnect coupling and a suitable

compressed air source to operate this appliance.

Follow all the operating and safety instructions for

the compressed air source and any special instruc-

tions regarding paint preparation.

NOTE

► Take note of the correct working pressure.

Excessively high pressure leads to strong

dispersion and overly-rapid liquid evapora-

tion. The surfaces become rough and develop

poor adhesion properties. If, however, the

working pressure is too low, the paint will not

be adequately dispersed. This leads to wavy

surfaces and droplets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 300488 PDFP 500 C3 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info