Bedienungsanleitung Parkside IAN 302303 PWDS 920 A1 (Seite 18 von 84) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

748067

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

13GB/IE

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and suc-

cess.

NOTE:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,

• Application other than speciﬁed,

• A breakdown of the electrical system that occurs due to

the non-compliance of the electric regulations and VDE

regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating instructions

before installing and commissioning the device.

The operating instructions are intended to help the user to

become familiar with the machine and take advantage of its

application possibilities in accordance with the recommen-

dations.

The operating instructions contain important information

on how to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, reduce

downtimes and how to increase reliability and service life

of the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt

and moisture. Read the instruction manual each time before

operating the machine and carefully follow its information.

The machine can only be operated by persons who were

instructed concerning the operation of the machine and who

are informed about the associated dangers. The minimum

age requirement must be complied with.

In addition to the safety notes contained in the present oper-

ating instructions and the special regulations of your country,

the generally recognized technical rules for the operation of

machines must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety

information.

2. Device description (Fig. 1-10)

1. Grinding plate

2. Front handle

3. Wing nut

4. LED-Light

5. Setting speed range

6. Locking knob

7. Main Handle

8. Power Cord

9. Additional Handle

10. Connection for dust extractor

11. Telescopic extension

12. Lock for telescopic extension

13. ON/OFF switch

14. Flexible suction hose

15. Hose adaptor

16. Sanding paper

17. Allen Key

18. Screwdriver

19. Carbon brushes

3. Scope of delivery

1 Drywall sander

1 ﬂexible suction hose (14)

6 abrasive sheets (16) (different grain sizes)

1 Phillips screwdriver (18)

2 replacement carbon brushes (19)

1 Allen key (17)

1 Cotter pin (C)

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the packaging

and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport dam-

age.

• If possible, store the packaging until the warranty period

has expired.

ATTENTION

The device and packaging materials are not toys! Chil-

dren must not be allowed to play with plastic bags, ﬁlm

and small parts! There is a risk of swallowing and suf-

focation!

4. Intended use

The intended use of this power tool is the sanding of large

areas of drywalls as a preparation before painting or wall-

papering using suitable abrasive sheets.

This power tool is neither suited for the preparation of small

areas, corners and edges, nor for the removal of wallpaper

and the grinding of ceilings and wet grinding.

Do not use the power tool for cutting or roughing or polish-

ing. Do not use it together with wire brushes. Do not treat

asbestos containing materials with this power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 302303 PWDS 920 A1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info