Bedienungsanleitung Parkside IAN 303408 PBS 350 A1 (Seite 28 von 72) (Deutsch, Englisch, Holländisch, Französisch)

748151

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

21GB/IE

12. Cleaning, maintenance, and

storage

m Important!

Prior to any adjustment, maintenance or service work discon-

nect the mains power plug!

Cleaning

Keep all safety devices, air vents and the motor housing free

of dirt and dust as far as possible. Wipe the equipment with

a clean cloth or blow it with compressed air at low pressure.

We recommend that you clean the device immediately each

time you have ﬁnished using it.

Maintenance

There are no parts inside the equipment which require ad-

ditional maintenance.

Storage

Store the device and its accessories in a dark, dry and frost-

proof place that is inaccessible to children. The optimum stor-

age temperature is between 5 and 30˚C.

Store the power tool in original packaging.

Cover the electrical tool in order to protect it from dust and

moisture.

Store the operating manual with the electrical tool.

13. Disposal and recycling

The equipment is supplied in packaging to prevent it from be-

ing damaged in transit. The raw materials in this packaging

can be reused or recycled. The equipment and its accesso-

ries are made of various types of material, such as metal and

plastic. Defective components must be disposed of as special

waste. Ask your dealer or your local council.

The packaging is wholly composed of environment ally-

friendly materials that can be disposed of at a local recy-

cling centre.

Contact your local refuse disposal authority for more details

of how to dispose of your worn out electrical devices.

Old devices must not be disposed of with household waste!

This symbol indicates that this product must not be

disposed of together with domestic waste in compli-

ance with the Directive (2012/19/EU) pertaining to

waste electrical and electronic equipment (WEEE). This

product must be disposed of at a designated collection point.

This can occur, for example, by handing it in at an authorised

collecting point for the recycling of waste electrical and elec-

tronic equipment. Improper handling of waste equipment

may have negative consequences for the environment and

human health due to potentially hazardous substances that

are often contained in electrical and electronic equipment.

• Press the workpiece ﬁrmly onto the saw bench (7) and

slowly slide into the Bandsaw blade (21).

• In many cases it is helpful to roughly saw curves and cor-

ners approximately 6 mm from the line.

• If it is necessary to saw curves that are too tight for the saw

band used, auxiliary cuts must be sawn up to the front face

of the curve, so that these fall off as wood waste when the

ﬁnal radius is sawn.

11. Electrical connection

The electrical motor installed is connected and ready for op-

eration. The connection complies with the applicable VDE

and DIN provisions.

The customer‘s mains connection as well as the extension ca-

ble used must also comply with these regulations.

Important information

In the event of an overloading the motor will switch itself off.

After a cool-down period (time varies) the motor can be

switched back on again.

Damaged electrical connection cable

The insulation on electrical connection cables is often dam-

aged.

This may have the following causes:

• Passage points, where connection cables are passed

through windows or doors.

• Kinks where the connection cable has been improperly

fastened or routed.

• Places where the connection cables have been cut due to

being driven over.

• Insulation damage due to being ripped out of the wall

outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not be

used and are life-threatening due to the insulation damage.

Check the electrical connection cables for damage regu-

larly. Make sure that the connection cable does not hang on

the power network during the inspection.

Electrical connection cables must comply with the applicable

VDE and DIN provisions. Only use connection cables with

the marking „H05VV-F“.

The printing of the type designation on the connection cable

is mandatory.

AC motor

• The mains voltage must be 220 - 240 V~ 50 Hz.

• Extension cables up to 25 m long must have a cross-sec-

tion of 1.5 mm

Connections and repairs of electrical equipment may only

be carried out by an electrician.

Please provide the following information in the event of any

enquiries:

• Type of current for the motor

• Machine data - type plate

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 303408 PBS 350 A1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info