Bedienungsanleitung Parkside IAN 305729 PHD 150 G4 (Seite 25 von 102) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

748078

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Releasing the starting lever (21) causes

the equipment to switch off. The system

remains pressurised.

• The turbo dirt blaster (24) produces a

rotating water jet and is designed for

low water consumption work.

• The standard Vario nozzle (18) pro-



for large surfaces.

Turn the tip of the nozzle left to reduce

the width of the jet. Turn the tip of the

nozzle right to expand the width of

the jet.

• The rotating washing brush (2) is ba-

sically used without pressure exertion.

The cleaning function results from the



The wash brush does not rotate if the



In the event of leaks in the



equipment immediately at the

on/off switch (7) and discon-

nect the equipment from the

mains at the mains power

cord. Risk of electric shock!

Start afresh with making the

water connections (cf. “Start-

up / Operation” from point 2.).



please proceed as follows:

To vent the supply hose:

1. Remove the quick connector for gar-

den hose adapter (25) on the water

connection coupling (13) and turn the

water tap on until the water comes out

without bubbles.

2. Switch off the water tap.

3. Connect the supply hose to the water

connection (14) on the equipment us-

ing the quick connector for garden

hose adapter (25).

4. Fully open the water tap.

To vent the equipment:

5. Switch on the on/off switch (7) until

pressure has built up.

6. Switch off the on/off switch (7).

7. Press the on lever on the gun (16) until

the pressure has gone.

8. Please repeat process 5. to 7. a few

times until there is no more air in the

device.

• You can lock or unlock the start

lever (21) of the spray gun (16)

by pressing the locking button

(22).

Lock the starting lever (21) to

prevent the pressure cleaner

from being inadvertently / ac-

cidentally started.

Interrupting operation

• Release the lever of the gun (16).

• During prolonged work intervals turn

off the pressure cleaner by its ON /

OFF switch (7).



switch off the equipment

immediately at the on/off

switch (7) and disconnect the

equipment from the mains at

the mains power cord. Risk

of electric shock! Only now

should the equipment be re-

turned to an upright position.



approx. 5 minutes before re-

connecting to the electricity.

Ending operation

1. After having worked with a detergent

rinse the pressure cleaner with clear

water.

2. Release the lever of the gun (16).

3. Turn off the pressure by its ON / OFF

switch (7). Disconnect the mains plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 305729 PHD 150 G4 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info