Bedienungsanleitung Parkside IAN 310320 PLV 1500 A1 (Seite 29 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch)

748155

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

Release the starting lever and reset

the implement after a cooling down

period of approx. 1 minute.

WARNING! The cylinder con-

tinues to run for a brief pe-

riod after the implement has

been switched off. Do not tilt

or carry the implement while

the motor is still running and

do not touch the cylinder

while it is still rotating. Dan-

ger of injury!

Working with the implement

To maintain a well cared-for lawn it should

be aerated every 4 to 6 weeks.

Verticuting is a more intensive intervention

than aerating and should only be carried out

once a year, the best time being in spring af-



When working on slopes

always proceed across the

slope. Be particularly careful

when walking backwards

and pulling the implement.

Danger of stumbling!

After work and to transport the imple-

ment disconnect the power plug and

wait until the cylinder is standing still.

The shorter the grass, the better the

lawn can be treated. Furthermore, the

implement is less stressed and the ser-

vice life of the cylinder is prolonged.

• The implement can be operated with or

without the collection bag.

Recommendation: Work with the collec-

tion bag for aerating and without the

collection bag for verticuting.

• Mow the lawn to the required grass

height.

 

may otherwise wind around the scari-



equipment.

• Select the appropriate working or

readjustment position (in the event of

cylinder wear) so that the implement is

not overloaded.

• Commence work in the vicinity of the

power socket and proceed away from

the socket.

• Always ensure that the extension cable is

behind you, and after turning move it to

the side that has already been treated.

• Guide the implement at a walking

pace down lanes that are as straight as

possible. To ensure uninterrupted aerat-

ing or verticuting the individual lanes

should always overlap by a few centi-

metres. Dwelling too long at the same

place while the implement is running

can damage the grass sward.

• To ensure that the extension cable is not

an impediment, turn the implement in

such a manner that the cable strain re-

lease on the bar always faces the side

that has been treated.

• Always clean the implement after each

use (see “Cleaning/Maintenance”).

• After having treated lawns with dense

moss growth, it is advisable to reseed

the lawn so that it can regenerate itself

quicker.

Transport

• Adjust the transport position (+10 mm)

setting (see “Setting the Working Posi-

tion”) when transporting the implement.

• Lift the implement to transport it over

steps and sensitive surfaces (e.g. tiles).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310320 PLV 1500 A1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info