749299
26
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
26 GB/IE
zSafety instructions
Please carefully read the instruc-
tions for use and follow the spec-
ified notices. Familiarise yourself
with the tool, its proper use and
the safety notices using these in-
structions for use. The nameplate
contains all the technical data for
this welding tool, please learn
about the technical facts of this
tool.
This device may be used by
children aged 16 years and
up, as well as by persons with
reduced physical, sensory or
mental capacities, or lacking
experience and / or knowl-
edge, so long as they are
supervised or instructed in the
safe use of the device and un-
derstand the associated risks.
Do not allow children to play
with the appliance. Cleaning
and user maintenance should
not be performed by children
without supervision.
Only have repairs and / or
maintenance performed by
electrically skilled persons.
Only use the welding cables
included (PISG 120 A1,
H01N2-D1x10 mm2).
During use the equipment
should not be located directly
against a wall, be covered,
or be jammed between other
equipment to ensure ample air
can be taken in through the
ventilation louvres. Verify the
equipment is correctly connect-
ed to the mains voltage. Avoid
any tensile load on the mains.
Unplug the mains plug from
the socket before transferring
the equipment to a different
location.
Always switch the equip-
ment off with the ON / OFF
switch when not in use. Set
the electrode holder down on
an insulated pad and allow
to cool for 15 minutes before
removing the electrodes from
the holder.
Pay attention to the condition
of the welding cables, the elec-
trode holders and the earth
terminals. Worn insulation and
conducting parts can produce
hazards and reduce the weld-
ing quality.
Arc welding produces sparks,
melted metal parts and smoke.
Therefore note: Remove any
flammable substances and
/ or materials from the work
area and its immediate sur-
roundings.
Ensure the work area is venti-
lated.
Safety instructions
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 310850 PISG 120 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info