749306
25
Zoom out
Zoom in
Vorherige Seite
1/95
Nächste Seite
26 GB/IE
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
NOTE
uThis instruction manual contains information
and suggestions for several attachments
and their uses. The attachments depicted
are not necessarily included in the
shipment, but are meant to indicate
additional possibilities for using this
product.
Before use
m WARNING!
uRisk of accident if the machine is operated
using electrical power supply that does
not match the specifications shown on the
rating label of the tool.
uThe mains voltage and the frequency of
the power source must correspond with the
specifications on the machine’s rating plate.
m WARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
Fitting the universal stirrer
Screw the shaft
4b
into the spiral
4a
completely (Fig. B).
Then screw the assembled universal stirrer 4
into the agitator shaft 3 completely (Fig. C).
Tighten the universal stirrer 4 firmly by using
assembly spanners 2 per rotational direction
(Fig. D).
Removing the universal stirrer
Removing the universal stirrer 4 from the
agitator shaft 3: Use the assembly spanners
2 per rotational direction of (follow the
reverse steps of “Fitting the universal stirrer”
mentioned above).
Operation
Switching on/off (see fig. E)
Switching on:
Press the ON/OFF switch 5 and hold it in
position.
Switching off:
Release the ON/OFF switch 5.
Switching to continuous
operation
Press the ON/OFF switch 5, lock the ON/
OFF switch 5 with the locking button 6,
then release the ON/OFF switch 5.
Switching off continuous
operation
Press the ON/OFF switch 5 briefly.
Soft-start function
This product has electronically controlled
soft start function which enables the product
starting up smoothly to avoid “kick-back”. This
function enhances safety and also prevents
the materials to be mixed from spurting out of
the mixing container.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 310920 PFMR 1600 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info