Bedienungsanleitung Parkside IAN 310942 PTSS 1200 C1 (Seite 23 von 94) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749334

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

PTSS 1200 C1

■ 20 │ GB│IE

a) Hold the saw ﬁrmly and position your arms

so that they can absorb the force of a kick-

back. Always stand to the side of the saw

blade and never in line with it. If a kickback

occurs, the circular saw may jump backwards.

However, by taking appropriate precautions the

operator can control the kickback forces.

b) If the saw blade jams or you stop working,

switch the saw oﬀ and hold it steadily in the

workpiece until the saw blade has completely

stopped turning. Never attempt to remove

the saw from the workpiece or pull it back-

wards while the saw blade is still moving as

this could lead to a kickback. Investigate and

take corrective actions to eliminate the cause of

blade binding.

c) If you want to restart a saw that is still in the

workpiece, centre the saw blade in the cut

and check to ensure that the teeth are not

caught anywhere in the workpiece. If the saw

blade catches it can jump out of the workpiece

or cause a kickback when the saw is restarted.

d) Support large panels to minimise the risk of

blade pinching and kickback. Large panels

tend to bend under their own weight. Panels/

boards must be supported on both sides: i.e.

both in the vicinity of the saw cut and also at

the edge.

e) Do not use blunt or damaged saw blades.

Saw blades with blunt or misaligned teeth may

cause excessive friction as the saw cut is too

narrow, and this can cause a saw blade jam

and kickback.

f) Before sawing, ensure that the fastenings for

the cut depth and cut angle settings are tight-

ened. If the settings change while sawing, the

saw blade might jam and cause a kickback.

g) Be particularly careful when sawing in exist-

ing walls or other obscured areas. The inserted

saw blade could get caught on hidden objects

and cause a kickback.

Function of the lower blade guard

a) Check whether the lower blade guard closes

properly before each use. Do not operate

the saw if lower blade guard does not move

freely and close instantly. Never clamp or tie

the lower blade guard into the open position.

If the saw is accidentally dropped, lower blade

guard may be bent. Raise the blade guard with

the release lever and make sure it moves freely

and does not touch the blade or any other part

at all angles and cut depths.

b) Check the operation of the lower blade

guard spring. Have the saw serviced before

using it if the lower blade guard and spring

are not working properly. Damaged parts,

sticky deposits or accumulations of chippings

can cause the lower blade guard to operate

slowly.

c) Lower guard may be retracted manually

only for special cuts such as “plunge cuts”

and “compound cuts”. Raise the lower blade

guard with the release lever and release it

as soon as blade enters the material. During

all other types of sawing work, the lower blade

guard should function automatically.

d) Always ensure that the lower blade guard is

covering the blade before placing the saw

down on the workbench or ﬂoor. An unpro-

tected, coasting saw blade will move the saw

in the opposite direction to the cutting direction

and saw anything in its path. Always take into

account that the saw blade takes some time to

stop spinning.

Supplementary notes:

■ Do not use any grinding discs.

■ Use only saw blades with diameters corre-

sponding to the label on the saw.

■ Always use the right saw blade for the material

being worked.

■ Use only saw blades with a speed marking

that corresponds to or is higher than the speed

speciﬁed for the power tool.

■ Saw blades that are intended for use on wood

or similar materials must comply with EN 847-1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310942 PTSS 1200 C1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info