Bedienungsanleitung Parkside IAN 311839 PKZ 180 C4 (Seite 19 von 86) (Deutsch, Englisch)

749289

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

PKZ 180 C4

■ 16 │ GB│IE

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀect the

power tool’s operation. If damaged, have

the power tool repaired before use. Many ac-

cidents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) Always arrange for the exchange of the plug

or the power cord to be carried out by the

manufacturer of the appliance or by its ap-

proved customer services. This will ensure that

the safety of the power tool is maintained.

Device-speciﬁc safety instructions

■ This appliance may not be used by children or

people with reduced physical, sensory or mental ca-

pabilities or a lack of experience and knowledge.

Children must not use the appliance as a plaything.

Cleaning and user maintenance tasks may not be

carried out by children unless they are supervised.

■ Avoid using the compressor at temperatures

below +5 degrees.

■ Never leave the compressor unsupervised while

it is in use.

■ Ensure that the ON/OFF switch is turned oﬀ

when connecting to the mains power supply.

■ Caution! Operate the compressor only for a

short time. The appliance may overheat if oper-

ated continuously for longer than 10 minutes.

Switch the appliance oﬀ immediately and allow

it to cool down for at least 10 minutes.

■ Risk of injury! Do not pump any objects up to

more than the intended pressure. They could

burst and cause injury and/or material damage.

■ Do not exceed the permissible output range of

the compressor. Do not pump up any lorry,

tractor or other large tires.

■ Do not work with any materials that are or could

be easily inﬂammable or explosive.

■ Never use the appliance for purposes other

than the ones for which it was designed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 311839 PKZ 180 C4 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 311839 PKZ 180 C4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info