Bedienungsanleitung Parkside IAN 311903 PWS 230 C3 (Seite 25 von 109) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749297

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

PWS 230 C3 GB│IE │ 21 ■

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) Always arrange for the replacement of the

plug or the power cord to be carried out by

the manufacturer of the appliance or by his

approved customer services. This will ensure

that the safety of the power tool is maintained.

Safety instructions for all

applications

Special safety instructions for grinding and

abrasive cutting:

a) This power tool is to be used as a grinder and

abrasive cutting appliance. Please follow all

safety instructions, instructions, diagrams and

data that you receive with the appliance. If

you do not observe the following instructions,

this can lead to an electrical shock, ﬁre and/or

serious injuries.

b) This power tool is not suitable for sandpaper

sanding, working with a steel brush or bur-

nishing. Using the power tool for applications

for which it is not designed can lead to hazards

and injuries.

c) Do not use any accessories that have not

been speciﬁcally provided or recommended

by the manufacturer for this power tool. Just

because you can attach the accessories to your

power tool does not guarantee they are safe to

use.

d) The maximum speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Acces-

sories that rotate faster than the permissible rate

can break and throw pieces into the air.

e) The external diameter and thickness of the

accessory tool used must comply with the di-

mensions of the power tool. Incorrectly dimen-

sioned accessory tools cannot be suﬃciently

shielded or controlled.

f) Attachment tools with a thread insert must

match the thread of the grinding spindle ex-

actly. For attachment tools that are mounted

using a ﬂange, the diameter of the hole on

the attachment tool must correspond to the

width of the ﬁtment on the ﬂange. Accessory

tools that do not exactly ﬁt on the grinding

spindle rotate unevenly, vibrate severely and

can lead to a loss of control.

g) Never use damaged accessory tools. Check

accessory tools such as grinding discs before

each use for chips or cracks, grinding plates

for cracks, wearing or excessive wear and

tear and wire brushes for loose or broken

wires. If the power tool or the accessory tool

in use is dropped, check to see if it is dam-

aged or use an undamaged accessory tool.

When you have checked and inserted the

accessory tool, ensure that you and any other

persons in the vicinity remain outside of the

level of the rotating accessory tool and allow

the tool to rotate at maximum speed for one

minute. Damaged accessories usually break

during the test period.

h) Wear personal protective equipment. De-

pending on the application, ensure that you

use full face protection, eye protection or

goggles. Use a dust mask, hearing protec-

tion, protective gloves or special apron that

protect you from grindings and material

particles as required. Protected your eyes from

ﬂying debris that may be created during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application. If

you are exposed to loud noise for any length of

time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or bro-

ken accessory tools can ﬂy oﬀ and cause injury

– even outside the immediate working area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 311903 PWS 230 C3 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info