Bedienungsanleitung Parkside IAN 315808 PHS 9500 A1 (Seite 23 von 100) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

749330

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

19GB/IE

2. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and suc-

cess.

NOTE:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,

• Application other than speciﬁed,

We recommend:

Read through the complete text in the operating instructions be-

fore installing and commissioning the device.

The operating instructions are intended to help the user to be-

come familiar with the machine and take advantage of its ap-

plication possibilities in accordance with the recommendations.

The operating instructions contain important information on

how to operate the machine safely, professionally and econom-

ically, how to avoid danger, costly repairs, reduce downtimes

and how to increase reliability and service life of the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt and

moisture. Read the instruction manual each time before operat-

ing the machine and carefully follow its information.

The machine can only be operated by persons who were in-

structed concerning the operation of the machine and who are

informed about the associated dangers. The minimum age re-

quirement must be complied with.

In addition to the safety instructions contained in this operating

manual and the speciﬁc regulations of your country, the techni-

cal rules generally accepted for the operation of machines of

the same type must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety in-

formation.

3. Device description (Fig. 1 - 5)

1. Cutting device

2. Hand guard

3. Front handhold

4. Choke

5. Cranking rope with handle

6. ON / OFF-switch

7. Throttle lock-out switch

8. Rear handle

9. Throttle trigger

10. Locking handle

11. Fuel tank cap

12. Fuel pump “Primer”

13. Zerk ﬁtting (grease ﬁtting)

14. Wing screw

15. Air ﬁlter cover

16. Spark plug connector

4. Scope of delivery

• Petrol hedge trimmer

• Mixing bottle (A)

• Spark plug socket spanner (B)

• Open end wrench 8/10 (C)

• Allen key S5 (D)

• Allen key S4 (E)

• Knives protection (F) (preassambled)

• Impact protector (M)

• Manual

5. Intended use

The machine meets the currently valid EU machine directive.

Before starting any work, all protective and safety devices must

be in place.

These hedge clippers have been designed to cut soft, freshly

grown hedge material. They are not suitable for cutting branch-

es, tough wood or other material to be cut.

The machine has been designed to be operated by one person.

The operator is responsible for third parties in the area of op-

erations.

All safety and hazard notices on the machine must be ob-

served.

All safety and hazard notices on the machine must be kept in a

completely legible condition.

Use the machine in a technically ﬂawless condition only, as

well as for its intended purpose, in a safe manner and being

aware of dangers, in compliance with the operating instruc-

tions!

Disruptions which can aﬀect safety in particular must be elimi-

nated straight away!

The manufacturer’s safety, operation and maintenance instruc-

tions as well as the technical data given in the calibrations and

dimensions must be adhered to.

Relevant accident prevention regulations and other generally

recognized safety and technical rules must also be adhered to.

The machine may only be used, maintained or repaired by

trained persons who are familiar with the machine and have

been informed about the dangers. Unauthorized modiﬁcations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 315808 PHS 9500 A1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info