Bedienungsanleitung Parkside IAN 43001 PFS 710 B1 (Seite 36 von 43) (Französisch, Italienisch)

745203

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

36 GB

Sabre saw PFS 710 B1

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product. The

instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as de

scribed

and for the speciﬁed applications. If you pass the

product on to anyone else, please ensure that you

also pass on all the documentation with it.

Proper use

The device is intended for sawing, cutting to length

or trimming of securely supported objects made of

wood, plastic and building materials. The sabre

saw is suitable for rough sawing work, straight and

curved cuts and sawing ﬂush. Please take note of

the information on saw blades and the advice on

working with your saw. Any other use or modiﬁca-

tion to the device shall be considered as improper

use and could give rise to considerable dangers.

The manufacturer will not accept liability for loss or

damage arising from improper use. The device is

not intended for commercial use.

Features and equipment

Oscillation speed setting wheel

Lock button

ON / OFF switch

Handle

Shoe

Saw blade

Quick-release chuck

Shoe adjustment lever

Carbon brushes cover

Unlocking button

Saw blade for wood

Bi-metal saw blade

Included items

1 Sabre saw PFS 710 B1

1 Saw blade for wood HCS 152 mm

1 Bi-metal saw blade 156 mm

1 Operating instructions

Technical information

Rated voltage: 230 V

50 Hz

Nom. power input: 710 W

Nom. no-load speed: n

0–2800 min

-1

Blade stroke: 20 mm

Max. cutting depth: Wood 160 mm

Aluminium 18 mm

Steel 8 mm

Saw blade mount size:

“ (12.7 mm)

Protection class: II /

Noise and vibration data:

Measured value for sound determined in accord-

ance with EN 60745. The A-weighted sound level

of the electric power tool is typically:

Sound pressure level: 88.02 dB(A)

Sound power level: 99.02 dB(A)

Uncertainty K: 3 dB

Wear ear protection!

Evaluated acceleration, typical:

Hand / arm vibration a

= 12.593 m / s

Uncertainty K = 1.5 m / s

The vibration level speciﬁed in

these instructions was measured in accordance with

an EN 60745 standardised measurement process

and can be used to compare equipment. The vibra-

tion emission value speciﬁed can also serve as a

preliminary assessment of the exposure.

The vibration level will change according to the ap-

plication of the electrical tool an in some cases may

exceed the value speciﬁed in these instructions. Re-

gularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particu-

Introduction Introduction / General safety advice for electrical power tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 43001 PFS 710 B1 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 43001 PFS 710 B1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info