Bedienungsanleitung Parkside IAN 56847 PFS 280 A1 (Seite 39 von 52) (Englisch, Portugiesisch, Spanisch)

744940

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

39 GB/MT

sprayed can even penetrate the skin through a

glove and be injected into your body.

Do not treat an injection as a simple cut.

A high pressure jet may inject toxins

into the body and cause serious inju

ries.

If the spray is injected into the skin, seek medical

help immediately.

Pay attention to any possible dangers

of the material being sprayed. Note

the markings on the container or the

manufacturer’s information relating

to the material being sprayed, includ-

ing the instruction to use personal

protective equipment. The manufacturer’s

in-structions must be followed to reduce the risk

of ﬁre, as well as injuries caused by toxins, car-

cinogens, etc.

Never spray without the nozzle head

in place. The use of a special nozzle insert

with the appropriate nozzle head reduces the

probability of a high-pressure jet penetrating

the skin and injecting toxins into the body.

Take care when cleaning or replacing

the nozzle inserts. If the nozzle insert

becomes blocked during spraying,

follow the manufacturer’s instructions

and switch of the device and release

the pressure before you remove the

nozzle for cleaning. Liquids under high

pressure can penetrate the skin and inject the

body with poison, which can lead to serious in-

juries.

eep the mains lead plug and the spr

gun trigger free of paint and other liq-

uids. Never hold the lead to help keep

it connected. If the connection comes apart

it could result in an electric shock.

Children or persons who lack the knowledge or

experience to use the device or whose physical,

sensory or intellectual capacities are limited

must never be allowed to use the device without

supervision or instruction by a person responsi-

ble for their safety. Children must never be

allowed to play with the device.

Before use

Pull the mains plug out of the

mains socket before you carry out any task on the

electrical power tool.

Connecting the air hose

Remove the protective caps

and insert the

air hose

into the hose connection socket

on the spray gun. Rotate the air hose

until the

hose lock button

ﬁts into place and engages.

Insert the other end of the air hose

into the

hose connection socket

on the motor.

Note: After use protect the hose ends with the

protective caps

Preparing the spraying surface

Mask oﬀ the surroundings of the spraying sur-

face thoroughly over a wide area. Otherwise

all non-covered areas or surfaces may become

soiled.

Make sure that the spraying surface is clean,

dry and free of grease.

Roughen smooth surfaces and then remove the

sanding dust.

Diluting the spray material

Note: Before diluting, check that the sprayed ma-

terial and the thinner are compatible. Consult the

sprayed medium manufacturer’s documentation for

information about suitable thinners (water, solvents).

If the wrong thinner is used, it can lead to lumps

forming, which may clog up the spray gun.

Proceed as follows for a sprayed material

that the manufacturer says must be thinned:

Take a measuring cup

with millilitre graduations.

Pour the required amount of sprayed material

into the paint cup

Thin the sprayed material by 10 % with the

thinner in accordance with the manufacturer’s

instructions.

General safety advice for electrical power tools / Before useGeneral safety advice for electrical power tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 56847 PFS 280 A1 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 56847 PFS 280 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info