Bedienungsanleitung Parkside IAN 58811 PWP 90 A1 (Seite 35 von 46) (Englisch, Italienisch, Portugiesisch, Spanisch)

744829

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

33 GB/MT

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

Safety advice for

car polisher

Avoiding the danger of injury, fire and

damage to your health:

J Always pull the plug out of the mains socket

before cleaning or maintaining the device.

J Ensure that the bonnet is well secured to the

buﬃng plate.

J Do not touch any rotating parts!

Before switching on check to ensure that the

buﬃng plate is not blocked and can start up

without problem.

J Check to ensure that the bonnet and the buﬃng

plate are complete and undamaged. Immedi-

ately exchange torn or damaged bonnets /

buﬃng plates.

J Wait until the polishing disc is ﬂat on the surface

to be polished before switching on the waxer /

polisher.

J Do not use any abrasives; these can destroy

the paint ﬁnish.

Original ancillaries /

accessories

J Use only the ancillaries and accessories

that are detailed in the operating in-

structions. The use of parts other than those

recommended in the operating instructions, or

other accessories, can put you at risk of injury.

Understood everything?

J When you have become familiar with these

general safety instruction for electrical appli-

ances, and, with the help of the appropriate

operating instructions, know all about the func-

tions and handling of your electrical appliance,

then you can start working with it. You will

work at your safest only with careful attention

to all of the declarations and instructions of the

manufacturer.

Operation

Placing the bonnet on the

buﬃng plate

1. Turn the car polisher over so that the polishing

disc

is pointing upwards.

2. Place the bonnet

over the buﬃng

plate

. Ensure that the bonnet

is placed

centrally and taughtly onto the buﬃng plate.

Applying wax / polish

with the terry bonnet

1. Always use high quality products for waxing.

j Follow the working methods given on the

packaging.

2. Apply the wax / polish directly on the working

surface of the terry bonnet

j Spread the wax / polish so that it forms a thin,

even, complete coating over the terry bonnet

Note: Too much wax does not necessarily

achieve a better ﬁnish and you will have to

spent more time later removing the coating.

3. Spread the wax evenly right up to the edge of

the terry bonnet

Switching on the device and

waxing / polishing the paintwork

Note: The paintwork to be polished must be care-

fully cleaned and completely dry. If necessary, use

a paintwork cleaner. Use products that are appro-

General safety advice for electrical power tools / Operation

58811_par_Poliermaschine_Content_LB5.indd 33 16.11.10 13:07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 58811 PWP 90 A1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 58811 PWP 90 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info