Bedienungsanleitung Parkside IAN 69089 PEXS 270 A1 (Seite 34 von 46) (Englisch, Portugiesisch, Spanisch)

744917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

34 GB/MT

Before use

Selecting the Grinding Disc

Metal Removal and Surface:

The rate of metal removal and the surface quality

are determined by the grain size of the grinding disc.

Please note that corresponding grinding discs

with diﬀerent grain sizes should be used for

processing diﬀerent materials.

Changing sanding sheets

The rotary sander is ﬁtted with a velcro rapid attach-

ment, making possible a quick and easy exchange

of sanding sheets.

Lift the grinding disc

at the side and pull it oﬀ

from the backing pad

in order to remove it.

Note: Before securing a new sanding sheet

remove all dust and dirt from the sander plate

Ensure that the openings in the sanding sheet

concur with the boreholes of the sanding plate

Dust / Swarf Removal by Suction

Please note the “Safety instructions” section.

Removal by Suction with Dust Collector:

Push the dust collector

completely onto the

device.

In order to empty the dust collector

pull it

oﬀ the device.

Note: Empty the dust collector

in good time

and regularly in order to ensure the optimum

removal of dust by suction.

External Exhaust Suction (see Illustration A):

Connection:

Push the adapter for external exhaust suction

on to the exhaust nozzle

and turn it clockwi

to ﬁx it in place. If necessary, use the reducing

piece

by pushing it into the adapter for

external exhaust suction

Push the hose of an approved suction device

(e.g. a workshop vacuum cleaner) on to the

adapter for external exhaust suction

, using

the reducing piece if necessary

Removal:

Pull the hose of the suction device oﬀ the

adapter for external exhaust suc-tion

Turn the adapter for external exhaust suction

in an anticlockwise direction and pull it oﬀ with

the reducing piece

if necessary.

Commissioning

Switching on and oﬀ

Note! Always switch the rotary sander on before

applying it to the material to be worked, then make

contact with it.

When operating the device you can select between

intermittent or continuous operation mode:

To switch on intermittent operation mode:

Press the ON / OFF switch

To switch off intermittent operation mode:

Release the ON / OFF switch

Switching on continuous operation:

Press the ON / OFF switch

, keep it pressed

down and press the locking button

Switching off after sustained operation:

Press the ON / OFF switch

and then release it.

Working instructions

Wait until the electric tool has stopped moving

before you put it down.

Grinding Surfaces

Turn the electric tool on, place the entire grinding

surface on the substrate that is to be worked

on and move it with moderate pressure across

the workpiece (see Illustration B, C, D).

Before use / Commissioning / Working instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 69089 PEXS 270 A1 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 69089 PEXS 270 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info