Bedienungsanleitung Parkside IAN 71830 PWS 230 A1 (Seite 44 von 46) (Französisch)

744963

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

44 GB

of sparks. Check that all the fastened-on parts

are correctly attached.

Pay attention to see that the arrow showing the

direction of rotation on the roughing / grinding

or cutting discs (including diamond cutting discs)

corresponds with the direction of rotation of the

device (see arrow on the head of the device).

Operation

Switching on and oﬀ

Note: Always switch on the angle grinder before

bringing it into contact with the workpiece material.

Switching on the device:

Press the safety lock-out

(see Fig. H).

Then press the ON / OFF switch

Switching oﬀ the device:

Release the ON / OFF switch

Rotating the hand grip:

DANGER OF INJURY!

Pull the mains plug out of the mains

socket before you carry out any task

on the device.

The hand grip

can be rotated by 90° to

the right or left (see Fig. A).

This allows the ON / OFF switch

to be

brought into the most comfortable position for

any working conditions.

Press the unlocking button

and rotate the

hand grip

to the right or left.

Make sure the hand grip

engages.

Maintenance and cleaning

DANGER OF INJURY!

Pull the mains plug out of the mains

socket before you carry out any task

on the device.

Do not use sharp objects for cleaning

the device. Do not allow any liquids

to enter the device. Otherwise the device

could be damaged.

Have the carbon brushes replaced only at the

service centre or an accredited electrical

equipment repair centre. The device requires

no other maintenance.

Clean the device frequently; for best results do

this immediately after you have ﬁnished using it.

Use a dry cloth to clean the housing – under

no circumstances use petrol, solvents or cleaning

agents that attack plastic.

A vacuum cleaner is required to thoroughly

clean the device.

Ventilation openings must always be kept free.

Remove any adhering dust with a narrow paint

brush.

Service

Have your device

repaired at the service centre or by

qualified specialist personnel using

original manufacturer parts only. This

will ensure that your device remains safe to use.

If the plug or lead needs

to be replaced, always have the

replacement carried out by the manu-

facturer or its service centre. This will

ensure that your device remains safe to use.

Warranty

The warranty for this appliance is for 3 year

from the date of purchase. The appliance

has been manufactured with care and me-

ticulously examined before delivery. Please

retain your receipt as proof of purchase. In

the event of a warranty claim, please make

contact by telephone with our Service

Department. Only in this way can a post-

free despatch for your goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile components,

e.g. buttons or batteries. This product is for private use

only and is not intended for commercial use.

Warranty / Disposal / Declaration of Conformity / ManufacturerPreparing for use / Operation / Maintenance and cleaning / Service / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 71830 PWS 230 A1 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 71830 PWS 230 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info