Bedienungsanleitung Parkside IAN 73791 PDMT 6.2 A1 (Seite 36 von 44) (Deutsch, Englisch, Holländisch)

745111

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

36 GB

Safety information for air tools

Only use suitable accessories. These can be

purchased from the manufacturer. Using non-

OEM accessories may result in hazards.

Only use ﬁltered and regulated compressed

air. Dust, caustic vapours and/or moisture may

damage the motor of the compressed air tool.

The hose must be designed for pres-

sures of at least 8.6 bar or 124.6

PSI, but at least 150 % of the maxi-

mum pressure generated in the system.

The tool and supply line must be

equipped with a hose coupling to

completely release pressure when

disconnecting the coupling hose.

DANGER! Avoid contact with live lines. This

equipment is not insulated against electric shock.

Torn or deformed sheets must not be used.

Check whether the sheets are ﬁxed correctly.

Ensure that no braking of the disk occurs due

to lateral counter-pressure.

Ensure that, if any sparks are produced, they

are dispersed in such a way that they pose no

danger.

Check whether the maximum operational speed

of the machine tool is the same or greater than

the given speed of the appliance.

The self-adhesive abrasive sheets must be af-

ﬁxed concentrically to the mounting plate.

The operation or stop control is released in the

event of a break in the power supply.

Only use lubricants recommended by the man-

ufacturer.

In particular cases, the speed must be checked

after each maintenance procedure.

Do not use the appliance if spare parts, which

aﬀect the safety of the user, are defective.

Do not modify this equipment in any way with-

out the manufacturer‘s approval.

Only use the tool with the speciﬁed pressure

(max. 6.2 bar).

Disconnect the tool from the air supply after each

use and when not in use.

Discontinue use if the tool leaks or is in need of

repair.

Never connect the tool to an air hose with

pressure exceeding 91.4 PSI or 6.2 bar.

Keep your working area clean and well lit.

Untidy or poorly lit working areas can result in

accidents. Doing so will allow you better con-

trol of the equipment, particularly under unfore-

seen circumstances.

Only have the equipment

repaired by qualiﬁed specialist personnel using

OEM spare parts. This will ensure your device

remains safe to use.

Keep children and other persons away from

the equipment during use. Distractions can

cause you to lose control of the equipment.

Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep moving parts away

from your hair, clothing and gloves. Loose

clothing, jewellery or long hair can become

caught in moving parts.

Put down trigger and equipment in the event of

unexpected compressor failure.

Secure work pieces. Use clamps or a vice to

secure the work piece. Holding the work piece

in your hand or pressing it against your body

will not allow for safe use of the equipment.

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your equipment.

Regularly maintain machines to verify all required

rated values and markings such as rated speed

or rated air pressure, required by ISO 11148,

are legible on the machine. If necessary, the

employee/user must contact the manufacturer

for replacement labels for markings.

Risks due to projected parts

If the work piece, one of the accessories or the

tool itself breaks, parts may be projected at

great speed.

Always wear impact-resistant eye protection

when using the machine to grind and cut. The

level of required protection required should be

assessed individually for each application.

When working overhead, a safety helmet must

be worn.

In this case, the risk to other people must also

be assessed.

It must be ensured that the work piece is pro-

perly secured.

Safety information for air tools

73791_Druckluft-Multitool_content_LB1 (nur NL).indd 36 11.05.12 17:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 73791 PDMT 6.2 A1 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info