Bedienungsanleitung Parkside IAN 73866 PSG 50 B2 (Seite 25 von 28) (Deutsch, Englisch, Holländisch)

744956

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

25 GB

General safety advice for electrical power tools / OperationGeneral safety advice for electrical power tools

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

5. Service

a) Have your device repaired at the ser-

vice centre or by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

Safety instructions for

motor carving devices

In order to avoid injury, fire and health

hazards:

Secure the work piece. Use clamping

devices / a vice to hold the work piece.

It is then held more securely than with your hand.

Wear protective goggles!

There is a danger of injury from

splintering materials ﬂying into your

eyes etc.

Wear a dust mask! During pro-

longed working with wood and par-

ticularly if materials are processed

which produce dusts that are hazardous to the

health.

Do not soak materials or areas which

are to be worked on with solvent-con-

taining liquids. Shaving of the materials may

produce harmful / toxic vapours.

Material containing asbestos must not

be processed with this device. Asbestos

is a known carcinogen.

Under no circumstances should you p

rop

up your hands next to or in front of the

device or the area to be worked on.

There is a danger of injury from the very sharp

attachment tools.

Always route the cable towards the back away

from the device.

In cases of danger remove the plug from the

socket immediately.

Original Accessories /

Additional Equipment

Use only the accessories and additional

equipment referred to in the instruc-

tions. The use of tools or other accessories

which are not recommended in the instructions

may represent a risk of injury.

Operation

Turning the Device On / Oﬀ

Insert the mains plug into a socket.

Switching on:

Press the ON / OFF switch

to the “I” position.

Switching off:

ress the ON / OFF switch

to the “0” positio

Inserting / replacing

blade inserts

RISK OF INJURY! Switch the

device oﬀ and pull the plug out of the mains socket

before carrying out any work on the device.

RISK OF INJURY! The blade

inserts

have very sharp cutting edges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 73866 PSG 50 B2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 73866 PSG 50 B2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info