Bedienungsanleitung Parkside IAN 74767 PDWS 8 A1 (Seite 27 von 31) (Deutsch, Englisch, Holländisch, Französisch)

745070

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

31 GB

Introduction / General safety instructions for air tools

Sound pressure level: 73 dB(A)

Sound power level: 85 dB(A)

General safety

instructions for air tools

Note: The terms „compressed air device“ or „de-

vice“ employed in the following text relate to the

compressed air devices deﬁned in the operating

manual.

Basic safety measures must be

followed when using compressed air devices air

tools to eliminate the risk of ﬁre, electric shock and

personal injury. Be sure to read and follow the no-

tices within these operating instructions prior to us-

ing the device and store them in a safe location. The

manufacturer assumes no liability for damages or

personal injury resulting from failure to follow these

operating instructions.

Children or persons who lack the knowledge or

experience to use the device or whose physical,

sensory or intellectual capacities are limited

must

never be allowed to use the device without su-

pervision or instruction by a person responsible

for their safety.

Do not allow children to play with the device.

RISK OF INJURY! Disconnect

the compressed air supply prior to any form of

maintenance work.

EXPLOSION

HAZARD! Never use petrol or

other ﬂammable liquids to clean the

air tool! Sparks could ignite residual vapours

inside the compressed air device resulting in

the compressed air device exploding. Do not

use the device in explosive environments with

ﬂammable liquids, gasses or dust. Never work

on materials which are or could potentially be

highly ﬂammable or explosive.

Only use the device in areas of application for

which it was designed!

Do not overburden the device.

Never use hydrogen, oxygen, car-

bon dioxide or other bottled gasses

to power this tool as doing so may

result in explosion, thus severe injuries.

Service and clean the device as described

above on a regular basis. (see Chapter „Clean-

ing and care“).

Check the device for damage before bringing

it into use. Always make sure that the device is

in perfect condition each time before use.

Remain alert at all times and always watch

what you are doing. Unanticipated movement

of the device could cause hazards.

Avoid placing your body in an unnatural posi-

tion. Keep proper footing and balance at all

times. By doing this you will be in a better posi-

tion to control the device in unforeseen circum-

stances.

Do not use an electrical device if its switch is

defective. An electrical power tool that can no

longer be switched on and oﬀ is dangerous

and must be repaired.

Store the device out of the reach of children

when you are not using it. Do not let anyone

use the device if he or she is not familiar with it

or has not read the instructions and advice.

Compressed air tools are dangerous when they

are used by inexperienced people.

Look after the device carefully. Check that mov-

ing parts are working properly and move freely.

Check for any parts that are broken or damaged

enough to detrimentally aﬀect the functioning

of the device. Have damaged parts repaired

before you use the device. Many accidents have

their origins in poorly maintained electrical

power tools.

Switch the device oﬀ if you do not use it any

more.

Always wear personal protective

device and safety glasses. Wearing

personal protective device such as

dust mask, non-slip safety shoes, safety helmet or

ear protectors, depending on the type of air tool

and its application, reduces the risk of injuries.

Check the connections and supply lines. All

maintenance units, couplings and hoses must

be designed in accordance with the character-

istic values of the device in relation to pressure

and air ﬂow. Pressure that is too low will impede

the functioning of the device, pressure that is too

high can lead to material damage or injury.

Introduction

74767_par_Druckluft Wasserstrahler PDWS 8 A1_Content_LB2.indd 31 16.05.12 15:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 74767 PDWS 8 A1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info