Bedienungsanleitung Parkside IAN 79416 PTS 480 A1 (Seite 28 von 34) (Deutsch, Englisch, Holländisch)

745108

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

28 GB

General safety advice for electrical power toolsGeneral safety advice for electrical power tools

with caution when using an electrical

tool. Do not use the electrical power

tool if you are tired or under the influ-

ence of drugs, alcohol or medication.

One moment of carelessness when using the

electrical power tool can lead to serious injury.

b) Always wear protective equipment

and wear safety glasses. Depending on

the type of electrical tool and its application,

wearing personal protective equipment such

as ear protection, dust mask or work gloves

reduces the risk of injuries.

c) Avoid unintentional operation of the

device. Check that the electrical power

tool is switched off before you connect

it to the mains, pick it up or carry it.

Accidents can happen if you carry the electri-

cal tool with your finger on the ON / OFF switch

or with the device switched on.

d) Remove any setting tools or spanners

before you switch on the electrical tool.

A tool or spanner left attached to a rotating

part of an electrical tool can lead to injury.

e) Avoid placing your body in an unnat-

ural position. Keep proper footing and

balance at all times. By doing this, you will

be in a better position to control the electrical

power tool in unforeseen circumstances.

f) Wear suitable clothing. Do not wear

loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov-

ing parts. Loose clothing, jewellery or long

hair can become trapped in moving parts.

g) If vacuum dust extraction and collec-

tion devices are fitted, do not forget to

check that they are properly connected

and used correctly. The use of dust extrac-

tion reduces the hazard presented by dust.

4. Careful handling and use of

the electrical power tool

a) Do not overload the device. Always use

an electrical power tool that is intended

for the task you are undertaking. By

using the right electrical power tool for the job,

you will work safer and achieve a better result.

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and off

is dangerous and must be repaired.

c) Pull the mains plug from the socket

before you make any adjustments to

the appliance, change accessories or

when the device is laid aside. This pre-

caution prevents the unintentional start of the

electrical tool.

d) Always ensure that electrical power

tools are kept out of reach of children

when not in use. Do not let anyone

use the device if they are not familiar

with it or have not read the instructions

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

persons.

e) Maintain the electrical power tool care-

fully. Check that moving parts are work-

ing properly and move freely. Check for

any parts that are broken or damaged

enough to detrimentally affect the func-

tioning of the electrical power tool.

Have

damaged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions. When doing

this, take the working conditions into

consideration, as well as the task at

hand. The use of electrical power tools for

purposes other than those intended can lead

to dangerous situations.

5. Service

a) Only have electrical power tools

repaired by qualified specialist per-

sonnel using OEM spare parts. This

ensures that the safety of the electrical power

tool is maintained.

79416_par_Tauchsaege_Content_DE-AT-NL.indd 28 07.12.12 12:47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 79416 PTS 480 A1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 79416 PTS 480 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info