Bedienungsanleitung Parkside IAN 86059 PDS 290 A1 (Seite 30 von 33) (Deutsch, Englisch, Holländisch)

745088

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

30 GB

Note: Always switch on the delta sander before

bringing it into contact with the workpiece material.

Switching on the device:

Move the ON / OFF switch

forwards into

setting “I”.

Switching off the device:

Move the ON / OFF switch

backwards into

setting “0”.

Selecting the oscillation speed:

You can preselect the oscillation speed you require

using the oscillation speed setting wheel

. You

can also change the speed whilst you are working.

The way to determine the optimum oscillation

speed for your task is to carry out a practical test.

Setting 1 = lowest oscillation speed /

Setting max. = highest oscillation speed

Vacuum dust extraction

DANGER OF FIRE! There is

the danger of ﬁre when working with electrical

devices that have a dust box or can be connected

to a vacuum cleaner. Under certain conditions the

wood dust in the dust extraction bag (or in the vac-

uum‘s dust bag) may ignite, e.g. as a result of ﬂying

sparks generated when abrading metals or metal

objects left in wood. This can happen particularly if

the wood dust is mixed with paint residue or other

chemicals and the abraded particles are hot from

prolonged abrasion. Therefore you must empty the

device’s dust collection box and the vacuum clean-

er’s dust bag before taking a break or stopping

work and always avoid overheating of the abrad-

ed particles and the device.

Wear a dust mask!

Always pull the mains plug is

out of the socket before doing any work on the

device.

Adapter for external vacuum

extraction (with reducer piece)

Connection:

Push the adapter for external vacuum extrac-

tion

into the dust extraction spout

When doing this observe the guide markings

on the device and adapter. Turn the suction

nozzles clockwise to lock.

If it is necessary to use the reducer piece

push the reducer piece into the adapter for

external vacuum extraction

Push the hose of a suitable dust extraction de

vice approved for that purpose (e.g. a workshop

vacuum cleaner) on to the adapter for external

vacuum extraction

or the reducer piece

Removal:

Pull the hose of the dust extraction device oﬀ

the adapter for external vacuum extraction

Turn anticlockwise to unlock the dust extraction

port

Pull oﬀ the adapter for external vacuum extrac-

tion

(with the reducer piece

if used).

Attaching / detaching

sanding sheets

Always pull the mains plug is out

of the socket before doing any work on the device.

Attaching:

Sanding sheets are attached to the backing plate

by means of the hook and pile fastening.

Detaching:

Simply pull the sanding sheet oﬀ the backing

plate

(see Fig. B).

Materials:

Wood (sanding sheets included), paint*, stone*

*depending on the sanding sheet

Preparing for use Preparing for use / Maintenance and cleaning / Service centre / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 86059 PDS 290 A1 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 86059 PDS 290 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info