Bedienungsanleitung Parkside IAN 89170 PBS 600 A1 (Seite 36 von 44) (Französisch, Italienisch)

745086

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

36 GB

Introduction / General safety advice for electrical power toolsIntroduction

Belt sander PBS 600 A1

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product.

The instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as descri-

bed and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure that

you also pass on all the documentation with it.

Proper use

The belt sander - depending on the sanding paper

used - is designed for dry sanding wood, plastic,

metal and putty, as well as painted surfaces. The de-

vice may only be used for dry sanding. Always use

a sanding belt and grade of grit suitable for the par-

ticular surface you are sanding. The speed selected

should also be appropriate for the material. The de-

vice is not intended for commercial use. Any other

use or modiﬁcation to the device shall be considered

as improper use and could give rise to considerable

dangers. The manufacturer will not accept liability for

loss or damage arising from improper use.

Features and equipment

Belt speed adjuster wheel

Recesses for clamp mounting

ON / OFF switch

Lock button for ON / OFF switch

Dust box

Release button for dust box

Belt adjuster screw

Sanding belt

Adapter port

Tensioning lever for sanding belt

Clamps

Adapter for external vacuum extraction

Reducer piece

Included items

1 Belt sander PBS 600 A1

1 Sanding belt

1 Dust collection box

1 Vacuum extraction adapter and reducer piece

(for external vacuum extraction)

2 Clamps

1 Operating instructions

Technical information

Belt sander PBS 600 A1

Nominal voltage: 230 V

50 Hz

Nom. power input: 600 W

No-load belt speed: 170–250 m / min

Sanding belt: 75 x 457 mm

Protection class: II /

Noise and vibration data:

Measured values for noise are determined in accor-

dance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 76.1 dB(A)

Sound power level: 87.1 dB(A)

Uncertainty K: 3 dB

Wear ear protection!

Total vibration, EN 60745:

Vibration emission value a

h,W

= 5.79 m / s

Uncertainty K = 1.5 m / s

rear handle: a

h,W

= 4.22 m / s

front handle: a

h,W

= 5.79 m / s

K = 1.5 m / s

The vibration level speciﬁed in

these instructions was measured in accordance with

an EN 60745 standardised measurement process

and can be used to compare equipment. The vibra-

tion emission value speciﬁed can also serve as a

preliminary assessment of the exposure.

The vibration level will change according to the ap-

plication of the electrical tool an in some cases may

exceed the value speciﬁed in these instructions. Re-

gularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 89170 PBS 600 A1 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 89170 PBS 600 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info