Bedienungsanleitung Parkside IAN 89570 PDEXS 150 A1 (Seite 33 von 39) (Deutsch, Englisch, Holländisch)

745094

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

33 GB

Safety instructions

Wear protective glasses!

Wear suitable clothing!

Hazards due to repetitive

motions

When using the sander or polisher for

work related tasks, the operator may

experience uncomfortable sensations

in hands, arms and the area of the

neck and shoulder or in other parts of

the body.

The operator should maintain a com-

fortable position whilst using this

sander or polisher, thereby ensuring

a secure grip and avoiding awkward

positions or positions making it diffi-

cult to maintain balance. The operator

should change his posture when working for

longer, to help avoid discomfort and fatigue.

If the operator experiences symptoms

such as persistently or repeatedly

feeling unwell, discomfort, palpita-

tions, pain, tingling, numbness, a

burning sensation or stiffness, these

warning signs should not be ignored.

The operator should report these to the em-

ployer and consult a qualified healthcare pro-

fessional.

Risks associated with

accessories

Unplug the sander or polisher before you change

tools or accessories.

Only use the size and types of accessories

and consumables recommended by the manu-

facturer of the sander or polisher.

Please avoid direct contact with the machine

tool during and after use, as it could have

heated up or have sharp edges.

Only use tools and accessories for the sander

and polisher that are designated for use by

the manufacturer of the sander and polisher.

Do not use cutting discs and machines for cutting.

It must be checked that the maximum operating

speed of the machine tool (flap discs, sanding

belts, fleece discs) is higher than the nominal

speed of the machine.

Please make sure that you affix the self-adhe-

sive abrasive sheets can be concentrically to

the mounting plate.

Hazards in the work

environment

Slipping, tripping and falling are the

main causes of injuries at the work-

place. Keep in mind that surfaces may have

become slippery during machine use, and

remember tripping hazards caused by the air-

or hydraulic hose.

Proceed with caution in unfamiliar

surroundings. There may be hidden dangers

due to electrical cables or other supply lines.

These machines for sanding and

polishing are not suitable for use in

explosive environments and are not

insulated against contact with electri-

cal power sources.

Verify that there are no electrical lines,

gas lines, etc. that may result in a hazard in

the event of them becoming damaged during

machine use.

Hazards due to dust

and vapours

Dusts and vapours generated by the

use of machines for sanding and pol-

ishing may result in damage to health

(e.g. cancer, birth defects, asthma and /

or dermatitis); it is imperative to perform a

risk assessment for these hazards and implement

the respective regulatory mechanisms.

The risk assessment should include dust

generated by machine use and the

dust already present in the area, which

is possibly being blown around.

89570_par_Druckluft_Exzenterschleifer_content_DE-NL-GB.indd 33 29.05.13 17:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 89570 PDEXS 150 A1 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 89570 PDEXS 150 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info