Bedienungsanleitung Parkside IAN 89574 PDWS 8 A1 (Seite 26 von 28) (Französisch)

745117

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

26 GB

Environmental instructions and disposal information

Information about warranty and service processing

Warranty terms

The warranty period begins on the date of purchase.

Please retain the original receipt safely. This receipt

is required as proof of purchase.

Should this device show any fault in materials or

manufacture within 3 years from date of purchase,

it will be repaired or replaced - at our choice - by

us free of charge. This warranty is conditional on

the defective device and the receipt of purchase

being presented within the 3 year warranty period,

and that there is a brief written description of the

nature of the defect and of the date it arose.

If the defect is covered by our warranty, we will re-

turn the repaired device or replacement thereof. A

repair or exchange of the device does not extend a

new warranty period.

Scope of warranty

The device has been manufactured to strict quality

guidelines and meticulously examined before delivery.

The warranty applies to faults in material or manu-

facture. This warranty does not apply to product

parts subject to normal wear and tear and which

can therefore be considered as wear items, or to

damage to fragile parts, e.g. switches, storage bat-

teries or glass parts.

This warranty becomes void if the device has been

damaged or improperly used or maintained. All in-

structions provided in the operating instructions

must be followed strictly to constitute proper use of

the product. Purposes and practices which the op-

erating instructions warn of or advise against must

be avoided without fail.

This product is intended for private, non-commercial

use only. The warranty is void in the case of inap-

propriate and improper handling, use of force and

of any intervention which was not carried out by

our authorized service branch.

Procedure in the case

of warranty

Please follow the instructions below to ensure quick

processing of your matter:

When inquiring about your product please have

your receipt and product number (e.g. IAN) ready

as your proof of purchase.

The item number can be found on the type plate,

engraving, the cover page of your instructions (bot-

tom left) or the decal at the back or bottom.

In the event of malfunctions or other defects please

ﬁrst contact the service department below by phone

or e-mail.

A product recorded as defective, along with the proof

of purchase (sales receipt) and a description of the

defect and when it occurred, can then be returned

free of charge to you to the service address provided.

Note:

Visit www.lidl-service.com to download

this and many other manuals, product

videos and software.

How to contact us:

Name: C. M. C. GmbH

Website: www.cmc-creative.de

E-mail: service.gb@cmc-creative.de

Phone: +49 (0) 6894 9989752

(standard German landline

rates apply)

Registered oﬃce: Germany

IAN 89574

Please note the following address is not a service

address.

Please ﬁrst contact the service point (hotline)

named above.

Address:

C. M. C. GmbH

Katharina-Loth-Str. 15

66386 St. Ingbert

Germany

89574_par_Druckluft Wasserstrahler PDWS 8 A1_Content_LB2 (ohne NL).indd 26 11.04.13 16:47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 89574 PDWS 8 A1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 89574 PDWS 8 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info