Bedienungsanleitung Parkside IAN 90879 PHS 160 B2 (Seite 22 von 29) (Deutsch, Englisch, Holländisch)

745104

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

22 GB

General safety advice for electrical power toolsIntroduction

Detail sander PHS 160 B2

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product. The

instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as de

scribed

and for the speciﬁed applications. If you pass the

product on to anyone else, please ensure that you

also pass on all the documentation with it.

Proper use

This device – when combined with the appropriate

sandpaper – is suitable for dry-sanding wood, plas-

tic, metal, ﬁller and painted surfaces. The device is

particularly suitable for corners, proﬁles or diﬃcult to

access places. Any other use or modiﬁcation to the

device shall be considered as improper use and

could give rise to considerable dangers. We will

not accept liability for loss or damage arising from

improper use. Not suitable for commercial use.

Features

Mains lead

Adapter port

Reducer piece for external vacuum extraction

Tab (dust box)

Dust box for self-generated dust extraction

Release button - dust collection box

Ventilation slots

Patented backing plate (360° rotatable)

ON / OFF switch

Included items

1 Detail sander PHS 160 B2

1 Sanding sheet (Grit 120)

1 Reducer piece for external vacuum extraction

1 Operating instructions

Technical information

Nom. power input: 160 W

Nominal voltage: 230 V∼ 50 Hz

Non-load speed: n

13000 min

-1

Non-load oscillation speed: n

26000 min

-1

Backing plate: 360° rotatable

Protection class: II /

Noise and vibration data:

Measured values for noise are determined in accord-

ance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 80 dB(A)

Sound power level: 91 dB(A)

Uncertainty K: 3 dB

Wear ear protection!

Evaluated acceleration, typical:

Hand / arm vibration a

= 4.7 m / s

Uncertainty K = 1.5 m / s

The vibration level speciﬁed in

these instructions was measured in accordance with

an EN 60745 standardised measurement process

and can be used to compare equipment. The vibra-

tion emission value speciﬁed can also serve as a

preliminary assessment of the exposure.

The vibration level will change according to the ap-

plication of the electrical tool an in some cases may

exceed the value speciﬁed in these instructions. Re-

gularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particular

period of working, you should also take into account

the intervening periods of time when the device is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the period of working.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 90879 PHS 160 B2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 90879 PHS 160 B2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info