Bedienungsanleitung Parkside IAN 90882 PHKSU 710 A1 (Seite 32 von 40) (Französisch)

745134

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

PHKSU 710 A1

Device-speciﬁ c safety instructions for

circular saws

Safety instructions for all saws

Sawing method

a) DANGER! Keeps your hands clear

of the sawing area and the saw

blade. Hold the auxiliary handle or

motor housing with your other hand. When

both hands are being used to hold the saw,

neither can be injured by the saw blade.

b) Do not grip the underside of the workpiece.

The blade guard cannot protect from the saw

blade underneath the workpiece.

c) Set the cutting depth to match the thickness

of the workpiece. The blade should not extend

more than one full tooth depth under the work-

piece.

d) Never hold the workpiece to be sawn in your

hand or over your leg. Fasten the workpiece

on a stable working surface. It is important to

fasten the workpiece securely to minimise the

danger of bodily contact, jamming of the saw

blade or loss of control.

e) Hold the device by the insulated handles when

you are carrying out work during which the

cutting edge may come into contact with con-

cealed power cables or the tool’s own power

cable. Contact with a live wire will cause the

metal parts of the tool to become live which can

lead to an electric shock.

f) When making longitudinal cuts, always use

a guide rail or a straight edge guide. This will

improve the accuracy of your cut and reduce the

likelihood of the saw blade jamming.

g) Always use saw blades of the correct size

and with an appropriate central ﬁ xing bore

(e.g. star-shaped or round). Saw blades that

do not ﬁ t the mounting components in the saw

will not run true and could lead to a loss of

control.

h) Never use damaged or incorrect saw blade

washers or screws. The saw blade washers

and screws have been specially designed to

provide optimum performance and operational

safety for your saw.

Further safety instructions for all saws

Kickback – causes and corresponding safety

instructions

▯ A kickback is a sudden reaction caused as a

result of the saw blade catching, jamming or

being falsely aligned that cause the saw to

jump up uncontrollably and out of the work-

piece in the direction of the operator;

▯ if the saw blade catches or jams in a narrowing

saw cut, the blade can no longer rotate and the

power of the motor throws the device back in

the direction of the operator;

▯ if the saw blade twists in the saw cut or becomes

misaligned, the teeth at the rear edge of the saw

blade can become caught in the surface of the

workpiece causing the saw blade to jump out

of the cut and the saw to jump backwards in the

direction of the operator.

A kickback is caused by incorrect use or misuse of

the saw. It can be avoided by observing the follow-

ing safety precautions.

a) Hold the saw ﬁ rmly in both hands and position

your arms such that they can absorb the force

of a kickback. Always stand to the side of the

saw blade and never in line with it. If a kickback

occurs, the circular saw may jump backwards.

However, by using observing appropriate pre-

cautions, the operator can control the kickback

forces.

b) If the saw blade jams or you stop working,

switch the saw oﬀ and hold it steadily in the

workpiece until the saw blade has completely

stopped turning. Never attempt to remove the

saw from the workpiece or pull it backwards

while the saw blade is still moving as this

could lead to a kickback. Find out why the saw

blade has jammed and remove the problem.

c) If you want to restart a saw that is still in the

workpiece, centre the saw blade in the cut

and check to ensure that the teeth are not

caught anywhere in the workpiece. If the saw

blade catches it can jump backwards out of the

workpiece or cause a kickback when the saw

is restarted.

IB_90882_PHKSU710A1_LB2.indb 29IB_90882_PHKSU710A1_LB2.indb 29 22.07.13 14:2022.07.13 14:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 90882 PHKSU 710 A1 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 90882 PHKSU 710 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info