Bedienungsanleitung Parkside IAN 93549 PNKP 105 A1 (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

745198

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

6 GB/IE

Damaged or tangled cables increase the risk

of an electric shock.

If the mains power cable of this appliance is

damaged, it must be replaced by the manufac-

turer or its service department, or a similarly

qualiﬁed person to prevent hazards.

Use in weather protected rooms only

Unplug if you will not be using the device for

more than 30 minutes.

Let the device completely cool down after use

and before storing.

Do not use on material containing asbestos.

Avoid the risk of injury and burns as

well as heath hazards:

Risk of burning! The glue and the nozzle

reach over plus 105 °C.

Do not touch the nozzle or the glue. Do not let

the hot glue touch people or animals. If there

is contact with skin immediately put the aﬀec-

ted area under cold running water for several

minutes. Do not try to remove the glue from

your skin.

Always run the power cable away from the

appliance to the rear.

Original accessories / tools

Use only the accessories and attachments

detailed in the operating instructions, or those

which are compatible with the device.

Start-up

Prepare the area to be glued:

Do not use any ﬂammable solvents to clean the

area.

The room temperature and the temperature of

the material to be glued may not be colder

than +5 °C and no warmer than + 50 °C.

The area must be clean, dry and grease free.

Smooth out the surface before gluing.

Warm up cooled material such as e.g. steel for

a better join.

1. Fold the stand leg

out. Set the device aside.

2. Put a glue cartridge in the feed canal

3. Let the device warm up for 5 minutes. The

device is now ready to use.

Gluing:

Press the feed trigger

to start and control

the ﬂow of glue.

1. Apply the glue in dots. Apply the glue in a

zigzag line on ﬂexible material e.g. textiles.

2. Press both glued together work-pieces together

immediately after applying the glue for

approx. 30 seconds. The glued area is resilient

after approx. 5 minutes.

3. Place the glue gun on its stand leg

between

gluing.

Switching the device off:

Pull the mains plug from the socket.

Maintenance and Cleaning

The low temperature glue gun is maintenance free.

WARNING! Unplug the mains plug from the

socket before cleaning.

Always keep the device clean, dry and free of

oil or grease.

Do not allow liquids to enter the equipment.

Please use a soft cloth for cleaning the

housing. Never use petrol, solvents or cleaning

agents that attack plastic.

Service

Have your appliance

repaired by qualified specialist per-

sonnel using OEM parts only. This will

maintain the safety of the device.

If the plug or mains

lead needs to be replaced, always

have the replacement carried out by

the manufacturer or its service centre.

This will maintain the safety of the device.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Safety instructions / Start-up / Maintenance and Cleaning / Service Warranty / Disposal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 93549 PNKP 105 A1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info