Bedienungsanleitung Parkside KH 3038 (Seite 7 von 13) (Englisch)

464953

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

7 GB/IE/CY

2 x Guide plates

2 x Screws

10 x Saw blades

1 x Dust blow tube

3 x Threaded feet with nut, washer

and retaining ring

1 x Allen key

1 x Operating instructions

Technical data

Nominal voltage: 230 V

50 Hz

Rated power: 120 W

Short-term operation time: 20 min (S2)

Stroke rate (no load): n

400 - 1600 min

-1

Max. cut depth 90°: 50 mm

Max. cut depth 45°: 22 mm

Noise data:

A-weighted sound levels.

Sound pressure level: 67,2 dB (A)

Sound level: 80,2 dB (A)

Uncertainty K = 3 dB

Values determined in accordance with EN 61029.

Safety advice

J ATTENTION! In order to protect yourself from

electric shock, injury or ﬁre when using electrical

power tools, please observe the following basic

safety precautions. Read all these requirements

before you use the electrical power tool, and

keep the safety advice in a safe place.

Working safely

1. Keep your working area clean

and tidy.

J A disorderly working area can lead to accidents.

2. Be aware of the effects of the

environment.

Do not leave electrical power tools out in the rain

J Do not use electrical power tools in

moist or wet surroundings.

J Ensure that your working area is well lit.

J Do not use electrical power tools in

areas where there is risk of ﬁre or

explosion.

Protect yourself from electric

shock.

J Avoid touching earthed objects such as pipes,

heating radiators, ovens or refrigerators with

parts of your body.

4. Keep other people at a safe distance.

J Do not allow other people, in partic-

ular children, to touch the electrical

power tool or the mains lead.

Keep them away from your working area.

5. Store currently unused electrical

power tools in a safe place.

J When not being used electrical power tools

should be stored in dry conditions in a high

or enclosed place, out of reach of children.

6. Do not overload your electrical

power tool.

J By keeping within the speciﬁed working range

of the tool you will work more safely and

achieve a better result.

7. Use the right electrical power tool for

the task.

J Do not use low-output devices for heavy tasks.

J Do not use an electrical power tool for purposes

for which it was not intended. For example, do

not use a hand operated circular saw for trim-

ming tree branches or cutting logs.

8. Wear suitable clothing.

J Do not wear loose-ﬁtting clothing or jewellery.

They could become caught on moving parts.

J We recommend that you wear anti-slip foot-

wear when working outdoors.

J If you have long hair, wear a hair net.

Use personal protective

equipment.

J Wear protective glasses.

J Wear a dust mask if your work generates dust.

10. Attach the vacuum dust extraction

device.

Introduction / Safety advice

33383_SCROLL SAW_Dekupiersaege_Content_LB6.indd 7 23.07.09 11:29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside KH 3038 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside KH 3038

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info