558597
13
Zoom out
Zoom in
Vorherige Seite
1/97
Nächste Seite
PARKSIDE
Cordless 2 gear drill driver
PABS18-2 SL
For drilling and screwdriving into wood,
plastic and metal
Before you use it for the first time, it is essential that
you make yourself fully familiar with the functions of
the equipment and find out how to handle electrically
powered tools. Please read the following operating
instructions carefully along with the enclosed
safety advice
ƽ. These instructions are to be con-
sidered as a constituent part of the product.
í Proper use
This device is designed for drilling and screwing in-
to wood, plastic and metal. Use the device only as
described and for the indicated purposes. Any other
use or modification shall be deemed improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or dam-
age arising from improper use.The tool is not intend-
ed for commercial use.
í Features PABS 18-2 SL
Screwdriver /drill selector switch
Spirit level
Battery condition indicator
Ventilation air inlet
Forward/reverse switch
ON/OFF switch
Button for unlocking the battery
Battery pack
Torque selector
Keyless chuck
Fast charger
(Charging time only 50-60 minutes)
Green charge check light
Red charge check light
Contact
í Technical data
Cordless 2 gear drill driver PABS 18-2 SL
Nominal no-load
speed 1
st
gear: n
0
0-500/min
-1
Nominal no-load
speed 2
nd
gear: n
0
0-1400/min
-1
Nom. d.c. voltage: 18 V
Chuck size: 1,0 - 10 mm
Max. drill diameter: Steel: 10 mm,
Aluminium:15 mm,
wood: 20 mm
Var. driver torque: 1 - 8 Nm
Max. drilling torque: 18 Nm
Sound level: 74.35 dB (A)
Vibration value: 2.5 m/s
2
Weight: 2100 g
Fast battery charger JDA-22K
Charging current: 2600 mA
Charging time: 50-60 minutes
Battery pack
Nom. d.c. voltage: 18 V
Battery capacity: 1500 mAh
Capacity: 27 Wh
Power consumption/Watt
The power consumption in watts changes with the
load. The measured power consumption during var-
ious types of use is e.g.:
in 2
nd
gear with a 3 mm
drill bit in softwood: 090 watts
in 1
st
gear with a 10 mm
drill bit in (ST37) steel strip: 215 watts
in 1st gear with a 20 mm
drill bit in softwood: 330 watts
Power output/Torque/Newton metres (Nm)
The maximum torque is 18 Nm (soft screwing). The
power consumption can reach over 1000 W.
Do not overload the drill! As the speed of the motor
drops,the speed of the fan reduces and this may lead
to the motor overheating.
Introduction/Safety
14 GB
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 14
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside KH 3101 - PABS 18-2 SL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info