Bedienungsanleitung Parkside KH 3101 - PABS 18-2 SL (Seite 16 von 97) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

558597

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

PARKSIDE

࡯ A finely adjusted torque ensures the highest pre-

cision in all screwdriving conditions. Start off with

a low setting (1 or 2 on the scale

̇) and try in-

creasing it by stages until the best setting is

reached.

 The 16 torque settings cover the range up to ap-

prox. 8 Nm.

 If the value of the set torque is reached, the ma-

chine disengages the drive connection to the

chuck. By doing this, screws can be driven to a

predetermined depth, which is ideal for repetitive

work.

࡯ For drilling, turn the selector to the setting.

࡯ Slide the selector ቢ forward (setting:Drill) to work

with the tool set at its optimum for drilling.The full

torque of approx. 18 Nm is applied.

Automatic – spindle lock – a simple

way to change bits

Your rechargeable electric drill driver has a fully au-

tomatic spindle lock and is fitted with an en-

closed keyless chuck incorporating the latest tech-

nology ”Made in Germany”.

Once the motor has come to a halt, the drive shaft is

automatically locked so that the chuck

ቫ can be

opened simply by turning it .

After you have inserted the required bit and fixed it

in place by turning the chuck , you can immedi-

ately continue working (the symbols above show the

direction of rotation viewed into the workpiece, i.e.

with the chuck pointing away from you). The spindle

lock releases itself automatically when the motor is

started (by operation of ON/OFF switch

ቧ).

Sensitive – switch operation

 The trigger switch ቧ allows you to exercise fine

control over the speed of the drill to suit the par-

ticular circumstances. On delicate workpieces for

example, you can work carefully by using light

pressure on the trigger switch.

࡯ Increasing the pressure on the trigger switch al-

lows you to increase the speed as necessary up to

the maximum.

࡯ To take screws out, just reverse the direction

by moving the switch

ቦ to rotate the shaft anti-

clockwise.

 The integral electric brake ensures the shaft

quickly stops rotating – as soon as the trigger

switch is released – so that you can get to work

again fast.

Tips and tricks from the professionals

When screwing into wood, metal and other

materials you must always observe the

following advice:

1. Before you use

the drill driver, check whether the

screw or drill bit is properly fitted, i.e. centralised

in the chuck.

2. The dimensions and sha

pe of the screw bits make

them readily recognisable. If you are unsure al-

ways tr

y the particular screw bit out to see whether

it sits in the screw head without play. Try a num-

ber of different bits.

3. Torque: Smaller screws and bits in particular can

be easily damaged or become worn if they are

used with too high a torque and/or speed.

4. Hard screw

bed: Particularly high torques can oc-

cur e.g. with metal screws used with socket tool

bits. Select a low speed.

5. Soft screw

bed: The torque is small. You should

however also select a low speed in order not to

damage the workpiece surface by contact with the

metal screw head. Use a countersink.

When drilling into wood, metal and other

materials you must always observe

the following advice:

1. With small diameter

drill bits use a high drill

speed. For large diameter drill bits, use a lo

drill speed.

2. For hard materials, select a low drill speed.For soft

materials, select a high drill speed.

3. Take the rotating drill bit out of the hole frequently

Operation

GB 17

manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside KH 3101 - PABS 18-2 SL Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info