Bedienungsanleitung Parkside KH 3115 (Seite 11 von 79) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

464970

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

+ www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

IMPORTANT SAFETY ADVICE ƽ

· In addition, please read the advice in the accompanying booklet called "Safety advice" before using

the equipment for the first time.

· The PEBS 900 belt sander is designed for dry sanding of large surfaces of wood, plastic, metal and –

with increased removal rate – plaster and painted surfaces. The belt sander is only to be used for dry

sanding.

· If the mains cable becomes damaged or cut through whilst you are working, never touch the cable –

pull the plug out of the mains socket immediately. Never use electrical equipment with a damaged

mains cable.

· When working always keep the cable running away from the back of the machine.

· The belt sander should be connected to a suitable external vacuum suction device when sanding

wood for long periods and in particular when sanding materials that give rise to dusts that may be

hazardous to health. Wear a breathing mask, ear protectors and protective glasses.

· The sander is not to be used on materials containing asbestos.

· Secure the workpiece to be sanded if it is not stable under its own weight.

· Always make sure that the machine is switched off before you pull the socket out of the mains

socket.

· Switch on the belt sander first before you bring it into contact with the workpiece and lift the sander

off the workpiece before you switch it off.

· Do not continue to use a sanding belt if it is worn out or ripped.

· Avoid touching the moving sanding belt - danger of injury.

· Switch off the machine and let the belt come to a standstill before you place the sander down.

· Attention: sparks may be generated during use - danger of fire. Sparks may be generated when

metals are being sanded. You should therefore always be careful to ensure that no one is placed in

danger and no inflammable materials are kept near the working area.

· Use original spare parts and accessories to ensure the best performance from your sander.

USING THE SANDER FOR THE FIRST TIME

Note the mains voltage. The mains voltage must correspond with that shown on the sander rating

plate.

Equipment labelled as 230 V may also be used with 220 V.

SWITCHING ON AND OFF

You can select intermittent or continuous operation mode. For short busts of sanding use the

intermittent setting. For normal or longer periods of sanding we recommend the continuous setting.

Operation in your selected mode is as follows:

SWITCH ON INTERMITTENT MODE: Press the ON/OFF switch

SWITCH OFF INTERMITTENT MODE: Release the ON/OFF switch ´

Ꮯƭ

manual PEBS 900 07.11.2003 11:39 Uhr Seite 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside KH 3115 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside KH 3115

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info