Bedienungsanleitung Parkside MPKZ 2000 A1 - IAN 315340 (Seite 10 von 68) (Deutsch, Englisch, Holländisch, Französisch)

706349

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

5GB/IE/NI

Personal safety

Pay attention to what you are doing and use

power tools sensibly.

Do not use power tools when you are tired or

under the inﬂuence of drugs, alcohol or medi-

cation. A single moment of inattention while using pow-

er tools may cause severe injury.

b) Wear personal protective equipment and safe-

ty goggles.

Wearing personal protective equipment such as a dust

mask, non-skid safety boots, a protective helmet or hear-

ing protection according to the type and application of

the power tool reduces the risk of injury.

c) Avoid starting the power tool unintentionally.

Make sure that the power tool is switched oﬀ

before you connect it to the mains and/or in-

sert a battery, pick it up or carry it. lf you have

your ﬁnger on the switch when you carry the power tool,

or if the machine is switched on when you connect it to the

mains, this may result in accidents.

d) Remove adjustment tools or wrenches before

switching on the power tool.

Tools or wrenches in rotating machine parts may cause

injury.

e) Avoid abnormal body positions.

Stand securely and keep your balance at all

times. By doing so, you can control the power tool more

easily in unexpected situations.

f) Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep your hair, cloth-

ing and gloves away from moving parts. Loose

clothing, jewellery or long hair may be trapped in moving

parts.

g) lf dust extraction tools or collection bins can

optionally be attached, you must make sure

that they are connected and correctly used.

Using dust extraction tools may reduce risks caused by

dust.

h) Do not let familiarity gained from frequent use

of the tool allow you to become complacent

and ignore tool safety principles. A careless ac-

tion can cause severe injury within a fraction of a second.

Use and treatment of the power tool

a) Do not overload the tool.

Use the appropriate power tool for your type of work.

With appropriate power tools, you can work better and

more safely within the given power range.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detach-

able, from the power tool before making any

adjustments, changing accessories, or storing

power tools.

This preventive safety measure reduces the risk of starting

the power tool accidentally.

d) Store idle power tools out of the reach of chil-

dren.

Do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

e) Carefully maintain power tools and accesso-

ries.

Check moving parts for proper function and smooth run-

ning, and check whether there are parts which are bro-

ken or damaged to the extent that the functionality of the

power tool is impaired. Have damaged parts repaired

before using the power tool. Many accidents are caused

by poorly-maintained power tools.

f) Keep cutting tools sharp and clean. Carefully

maintained cutting tools with sharp edges are

less likely to jam and can be guided more eas-

ily.

g) Use power tools, accessory parts, insertion

tools, etc. in compliance with these instruc-

tions.

Take into account the working conditions and the activity

which is to be carried out. Using power tools for appli-

cations other than those intended may cause dangerous

Situations.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery han-

dles and grasping surfaces do not allow for safe handling

and control of the power tool in unexpected situations.

Service

a) Have your power tool repaired by qualiﬁed

specialists only, and always use original spare

parts for repair. This is to maintain the safety of the

power tool.

Warning! This electric tool generates an electromagnetic ﬁeld

during operation. This ﬁeld can impair active or passive medi-

cal implants under certain conditions. In order to prevent the

risk of serious or deadly injuries, we recommend that persons

with medical implants consult with their physician and the man-

ufacturer of the medical implant prior to operating the electric

tool.

Safety instructions for mitre saws

a) Mitre saws are intended to cut wood or wood-

like products, they cannot be used with abra-

sive cut-oﬀ wheels for cutting ferrous material

such as bars, rods, studs, etc. Abrasive dust causes

moving parts such as the lower guard to jam. Sparks from

abrasive cutting will burn the lower guard, the kerf insert

and other plastic parts.

b) Use clamps to support the workpiece when-

ever possible. If supporting the workpiece by

hand, you must always keep your hand at least

100 mm from either side of the saw blade. Do

not use this saw to cut pieces that are too small

to be securely clamped or held by hand. If your

hand is placed too close to the saw blade, there is an in-

creased risk of injury from blade contact.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside MPKZ 2000 A1 - IAN 315340 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info