Bedienungsanleitung Parkside PAAD 2 B1 - IAN 353305 (Seite 14 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

779489

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

14 GB/IE

rechargeable batteries, e.g. radiators / direct

sunlight.

If batteries / rechargeable batteries have

leaked, avoid contact with skin, eyes and

mucous membranes with the chemicals! Flush

immediately the aﬀected areas with fresh water

and seek medical attention!

WEAR PROTECTIVE GLOVES!

Leaked or damaged batteries / re-

chargeable batteries can cause

burns on contact with the skin. Wear suitable

protective gloves at all times if such an event

occurs.

This product has a built-in rechargeable battery

which cannot be replaced by the user. The

removal or replacement of the rechargeable

battery may only be carried out by the manu-

facturer or his customer service or by a similarly

qualiﬁed person in order to avoid hazards.

When disposing of the product, it should be

noted that this product contains a rechargeable

battery.

Before use

Charging the product

Note: Remove all packaging materials from the

product.

Note: You can recharge the product by using the

USB cable 8 provided with the speciﬁed input

voltage and current (see “Technical data”).

Note: In order to use the product without a USB

cable 8, you need to recharge the rechargeable

battery before use. The charging process takes

about 3 to 4hours.

Note: Use only SELV power supply of maximum

working output voltage 5 V (Uout) 1A.

Insert the Micro USB plug of the USB cable

8 into micro-USB input socket 6 of the

product.

Then insert the USB plug of the USB cable 8

into the USB port on USB power supply.

Note: Pay attention to the distance between

the lamp and USB power supply because

USB cable 8 length is approx. 50 cm.

Note: During charging, the charging indicator

7 lights up red. When charging is complete, the

charging indicator 7 lights up green. When the

charging indicator 7 is green, pull out the USB

cable 8 from the micro-USB input socket 6 of

the product to prevent the rechargeable battery

from discharging.

Note: Close the protective cap 9 before start to

use the product. Otherwise water could enter to

the product when it is used outdoors.

Fixing the product

The product can be used in 2 ways without having

to hold it in your hand:

Fold out the hook 5 to suspend the product

from a suitable suspension point.

Note: When hanging up the product, it must

be ensured that the selected location is suitable

for the weight of the product.

Fold out the stands 4 to let the product able

to stand on the ground (see Fig. B).

CAUTION! Please note the position of your

hands whilst opening and closing the stands

4 to prevent pinching your ﬁngers (see Fig. C).

Using the product without

a power connection

Fully charge the product as described in the

section “Charging the product“.

The product can be operated in 4 diﬀerent

modes, select these by repeatedly pressing

the ON / OFF switch 3.

press once: The side light 2

lights up at low power.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PAAD 2 B1 - IAN 353305 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info