764052
9
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
PAH 1300 B2
6 GBIENI
Installation
Additional handle:
You can position the additional handle as
you wish.
Undo the knurled nut .
Swing the additional handle around the
appliance axis or 180° forward or backward
into the desired position (see foldout page).
Retighten the knurled nut .
Fitting a tool:
Pull the locking sleeve backwards.
Before fitting a tool into the tool holder ,
grease it lightly.
Insert the tool with a rotating movement in the
tool holder until it clicks into itself.
Release the locking sleeve .
This locks the holder.
Check that the tool is properly locked by pulling
it. The system has radial play because of the
design.
Removing a tool:
Pull the locking sleeve backwards and pull
the tool out of the tool holder .
Adjust chisel position:
You can adjust the flat chisel in optimal
working position.
Place the flat chisel into the tool holder .
Push the chisel adjustment ring forward and
turn with the chisel adjustment ring the flat
chisel to the required position.
Release the chisel adjustment ring and turn
him until it clicks.
Operation
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation.
Switching to instantaneous operation:
Press the ON/OFF switch .
Switching off instantaneous operation:
Release the ON/OFF switch .
Switching to continuous operation:
Press the ON/OFF switch and lock it in this
position with the locking switch .
Switching off continuous operation:
Press the ON/OFF switch and release it
again.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
The appliance must always be kept clean, dry
and free from oil or grease.
Use a soft, dry cloth to clean the housing.
Clean the tool holder regularly.
WARNING!
If the replacement of the supply cord is nec-
essary, this has to be done by the manufac-
turer or his agent in order to avoid a safety
hazard.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PAH 1300 B2 - IAN 300553 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside PAH 1300 B2 - IAN 300553

Parkside PAH 1300 B2 - IAN 300553 Bedienungsanleitung - Holländisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info