Bedienungsanleitung Parkside PAHE 20-Li A1 - IAN 315261 (Seite 31 von 141) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

722849

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

│

27 ■

PAHE 20-Li A1

■ Never remove the plug from the power supply

by pulling on the power cable. Always pull the

power plug itself. Do not drag or carry the

appliance using the power cable. Keep power

cable away from heat, oil, sharp edges or

moving parts.

■ Remove the battery pack from the appliance

after completion of work or during cleaning

and maintenance.

■ Avoid unintentional starting of the appliance.

■ Appliances with defective switches must be re-

paired immediately to avoid damage or injuries.

■ Store the appliance outside of the reach of chil-

dren. Only those who are fully acquainted with

these operating instructions and the appliance

itself may operate the appliance.

■ Maintain power tools carefully. Check for mis-

alignment or binding of moving parts, breakage

of parts and any other condition that may aﬀect

the power tool’s operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

■ Therefore, have the appliance checked by quali-

ﬁed specialists. Use only the replacement parts

recommended by the manufacturer.

Precautions against kickback

CAUTION KICKBACK!

► Be aware of the danger of kickback when

working with the appliance. There is a risk

of personal injury.

You can avoid kickbacks by being careful

and using the correct sawing technique.

■ Contact with the tip of the rail can, in some

cases, lead to an unexpected rearwards

reaction resulting in the guide rail

ﬂying

upwards towards the operator (see Fig. A).

Fig. A

■ Kickbacks can occur if the tip of the guide rail

touches an object or if the wood bends and the

saw chain gets caught in the cut (see Fig. B).

Fig. B

■ If the saw chain jams in the upper edge of

the guide rail , the rail can kick back violently

towards the operator.

■ Any such reaction can lead to you losing con-

trol over the saw and possibly injuring yourself.

Do not rely solely on the chainsaw's built-in

safety devices. As the user of a chainsaw, you

can take a number of measures to avoid ac-

cidents and injury. A kickback is caused by

incorrect use or misuse of the power tool. It can

be avoided by taking proper precautions as

given below:

■ Hold the saw ﬁrmly with both hands, with

your thumb and ﬁnger around the handles of

the chainsaw. Hold your body and arms in a

position in which you can withstand kickback

forces. If suitable measures are taken, the op-

erator can control the recoil forces. Never

let go of the chainsaw.

■ Avoid an abnormal posture. This will prevent

inadvertent contact with the tip of the rail and

allows a better control of the chainsaw in unex-

pected situations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PAHE 20-Li A1 - IAN 315261 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info