764049
20
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
20
GB IE NI
Service intervals table
Machine part Action Before each
use After 10 hrs of use
Complete machine Check condition, replace da-
maged parts as needed
Accessible screws
and nuts Tighten
Saw chain Check, apply oil, reground or
replace
Blade bar Check, rotate, clean, apply oil
Sharpening the cutting teeth
Have the saw chain sharpened by a spe-
cialist, or proceed in accordance with the
operating manual for your saw chain shar-
pening device. Sharpening a saw chain
requires some practice. Replacing the saw
chain is preferable in case of doubt.
Changing the saw chain
Wear gloves when handling the
saw chain.
Never attach a new saw chain
onto worn teeth, or onto a dama-
ged or worn blade bar.
1. Switch off the device and remove the
batteries.
2. Remove the sprocket cover (5) by loos-
ening the wing nut (3) rst .
3. Remove the old saw chain (2).
The mounting and tensioning of the new
saw chain is described in the Assembly -
Mounting the saw chain” and “Tensioning
the saw chain” section.
Servicing the blade bar
The blade bar has to be reversed every
8-10 operational hours in order to ensure
even wear (see the “Servicing and clea-
ning - rotating the blade bar” chapter”).
1. Switch off the device and remove the
battery.
2. Remove the sprocket cover
(5), the saw chain (2) and the blade
bar (1).
3. Check the blade bar (1) for wear. Re-
move burrs and straighten the guide
surfaces with a at le.
4. Clean the oil passage (23) to ensure
fault-free, automatic oiling of the saw
chain during operation.
5. Mount the blade bar, saw chain and
sprocket cover and retighten the saw
chain (see the Assembly” chapter).
Turning the blade bar
Wear gloves when handling the
saw chain.
1. Switch off the device and remove the
battery.
2. Remove the sprocket cover (5) by loos-
ening the wing nut (3) rst .
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PAHE 20-Li B2 - IAN 354671 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info