Bedienungsanleitung Parkside PAHS 12 A1 - IAN 88933 (Seite 40 von 44) (Deutsch, Englisch, Holländisch, Französisch)

663574

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

40 GB

Start-up / Maintenance and cleaning / Service centreGeneral safety advice for electrical power tools / Before Initial Use / Start-up

Children should be supervised to ensure that

they do not play with the device.

Single use, non-rechargeable batteries must

never be recharged.

Before Initial Use

Removing / charging /

inserting the battery pack

Note: The battery packed is delivered partly

charged.

Charge the battery pack with the included charger,

ideally for a minimum of 3 hours. This will ensure

the battery delivers full power. Li-Ion batteries can

be charged at any time without reducing the life. In-

terrupting the charging process does not damage

the rechargeable battery.

1. To remove the rechargeable battery pack

press the release buttons

and slide the bat-

tery pack

out of the unit.

2. Insert the battery pack

into the charger

3. Insert the mains plug into the mains socket. The

charge indicator

will light up red.

4. The green charge indicator

shows charging

is complete and the battery pack

is ready

for use.

5. Slide the battery pack

into the unit.

Checking the battery charge

The battery LED

indicates the status or remain-

ing charge as:

RED/ YELLOW/ GREEN = maximum charge/ power

RED/ YELLOW = medium charge/ power

RED = low charge – recharge battery

Start-up

Note! Always switch the hand grinder on before

applying it to the material, then apply.

Switching the unit on:

Press the ON / OFF switch

Switching the unit off:

Press the ON / OFF switch

Vacuum dust extraction

DANGER OF FIRE! There is

the danger of ﬁre when working with electrical

devices that have a dust box or can be connected

to a vacuum cleaner. Under certain conditions the

wood dust in the dust extraction bag (or in the

vacuum‘s dust bag) may ignite, e.g. as a result of

ﬂying sparks generated when abrading metals or

metal objects left in wood. This can happen par-

ticularly if the wood dust is mixed with paint resi-

due or other chemicals and the abraded particles

are hot from prolonged abrasion. Therefore you

must empty the device’s dust collection box and the

vacuum cleaner’s dust bag before taking a break

or stopping work and always avoid overheating of

the abraded particles and the device.

Wear a dust mask!

Dust box for internal

vacuum extraction

Mounting:

Slide the dust box for self-generated dust ext-

raction

up to the stop on the hand sander.

Removal:

Press the release button

of the dust extraction

box for internal vacuum extraction

and

withdraw it towards the rear of the device.

Note: Empty the dust collector in good time in or-

der to ensure the optimum removal of

dust by

suction.

To do so, remove the dust box

from the de-

vice as described above. Open the dust box

by pulling on the tab

and remove the cover.

Now tap both parts to thoroughly clean them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PAHS 12 A1 - IAN 88933 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info