Bedienungsanleitung Parkside PALA 20-Li A1 - IAN 318953 (Seite 27 von 118) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

722848

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

PALA 20-Li A1

■ 24

│

■ To protect yourself from falling branches, do not

stand directly under the branch or twig being

cut. The pruning shears should not be held at an

angle greater than 60° to the ground surface.

■ To reduce the risk of injury from moving parts,

always stop the product, ensure that all moving

parts are stopped, and remove the battery

before

– You clean or remove a blockage

– You leave the product unattended

– You ﬁt or remove attachments.

– You check, maintain or work on the product

■ Keep the unit clean from cuttings and other ma-

terial. They can get stuck between the clamping

jaw and the blade.

Additional safety instructions

■ Do not allow yourself to get lulled into a false

sense of security and do not ignore the safety

regulations for power tools, even if you are

familiar with the power tool after repeated use.

■ Careless handling can lead to serious injuries

within seconds.

■ Keep handles and grasping surfaces dry, clean

and free from oil and grease.

■ Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool

in unexpected situations.

■ Do not use a damaged or modiﬁed battery.

■ Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or

pose a risk of injury.

■ Do not expose a battery to ﬁre or excessively

high temperatures.

■ Fire or temperatures above 130°C may cause

an explosion.

■ Follow all instructions regarding charging and

never charge the battery or the cordless tool

outside the temperature range given in the oper-

ating instructions.

■ Incorrect charging or charging outside of the

permissible temperature range can destroy the

battery and increase the risk of ﬁre.

■ During cutting, keep the area clear of bystanders,

children and animals.

■ When cutting a branch under tension, make

sure that you are not hit by wood that snaps

back when the resistance is removed.

■ Look after the product carefully. Keep the cut-

ting edge sharp and clean for optimum perfor-

mance and to reduce the risk of injury.

■ Before each use and after each impact, check

that no parts are damaged. Any damaged part

must be properly repaired or replaced by au-

thorised service personnel.

■ If the product has been dropped or received

a heavy blow or begins to vibrate abnormally,

stop the product immediately and inspect it for

damage or identify the cause of the vibration.

Any damaged parts must be properly repaired

or replaced by authorised service personnel.

■ Check damaged parts. Before continuing to use

the tool, any damaged safety devices or other

damaged parts must be carefully inspected to

determine whether they function properly.

■ Do not cut where there is a risk of hidden cables.

■ Do not cut any cables.

■ Keep the working area free of cables and wires

(e.g. chains of lights).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PALA 20-Li A1 - IAN 318953 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info