735373
13
Zoom out
Zoom in
Vorherige Seite
1/73
Nächste Seite
PAK 16 A1 / PALP 16 A1
GB
IE
NI
 9
Operating the cordless
compressor PAK 16 A1
This appliance is not designed for continuous
operation. The appliance may be used for a maxi-
mum of 10 minutes continuous operation. If the
appliance overheats, remove the battery pack
.
Allow the appliance to cool down completely and
then try using it again.
Display indicator
Press the ON/OFF switch on the display
or press the ON/OFF switch to switch on
the display indicator .
The last set pressure is displayed for 2 seconds.
After two seconds, the current pressure of the
connected item is shown.
NOTE
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
If the display indicator
is switched on, you
can switch between "bar" and "psi" by pressing
the ON/OFF button .
To switch off the display indicator
, press the
ON/OFF button for 3 seconds.
NOTE
The compressor will not work if the display
indicator
is switched off.
Setting the pressure
Hold down the "+" or "–" button until the
display flashes.
Press the "+"
or "–" button to set the
desired pressure.
Once you see the desired pressure on the
display indicator
, do not press any button
for about 3 seconds.
The desired pressure is now set.
NOTE
The display indicator
(and thus the com-
pressor) switches off after around three
minutes of inactivity.
TIP
If you press and hold the "+"
or "–"
button, the pressure changes quickly.
Initial operation
Loosen the cap nut (do not unscrew it com-
pletely!), twist in the compressed air hose
threaded connection
22a
and retighten the
cap nut .
Select the desired pressure.
Screw one of the supplied adapters (
, , ,
, , ) tightly onto the compressed air hose
adapter .
Connect the adapter
, , , , or
to the object to be inflated.
Press the ON/OFF switch
.
The compressor switches off automatically when
you reach the preset pressure.
Pull the adapter
, , , , or out of
the now inflated item.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PALP 16 A1 - IAN 280447 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info