Bedienungsanleitung Parkside PALP 20-Li B2 - IAN 317171-1904 (Seite 22 von 128) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

722794

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

GB IE

Technical data

Cordless air pump ................PALP 20-Li B2

Nominal voltage U ..................... 20 V

Air volume ................................70 m

Sound pressure level

) ................. 72.27 dB(A), K

= 3 dB

Sound power level (L

)

measured ........ 83.27 dB(A), K

= 3 dB

Vibration (a

) ........1.63 m/s

, K= 1.5 m/s

Cordless compressor ..............PAK 20-Li B2

Nominal voltage U ...................... 20 V

Max. operating pressure 0.70 MPa (7 bar)

Sound pressure level

) ................... 75.2 dB(A), K

= 3 dB

Sound power level (L

)

measured ..... 85.3 dB(A), K

= 2.47 dB

Vibration (a

) .......1.75 m/s

, K= 1.5 m/s

Attention! An up-to-date list

of battery compatibility can

be found at:

www.lidl.de/akku

This device can only be operated with the

following rechargeable batteries:

PAP 20 A1, PAP 20 A2, PAP 20 A3.

This type of battery may be charged

with the following chargers: PLG20A1,

PLG20A3, PDSLG20A1.

Battery (Li-Ion) ...............PAP 20 A1

Battery cells ......................................... 5

Nominal voltage ......................... 20 V

Capacity ..................................... 2.0 Ah

Energy ..................................... 40 Wh

Charging time ...................... approx. 1 h

Temperature...........................max. 50°C

Charging process ...................4 - 40°C

Operation .......................... -20 - 50°C

Storage .................................0 - 45°C

Charger .............................. PLG 20 A1

Nominal consumption .....................65 W

Voltage input ............ 230-240 V~, 50 Hz

Voltage output ......................... 21.5 V

Voltage current ..............................2.4 A

Safety class ......................................

Miniature fuse ............................. T3.15A

Attention! This charger can only

recharge the following batteries:

PAP20A1, PAP20A2, PAP20A3.

Levels of noise and vibration were deter-

mined according to the standards and re-

gulations in the declaration of conformity.

The speciﬁ ed total vibration value and the

stated noise emission value have been

measured according to a standardised test

method and can be used to compare one

power tool with another.

The speciﬁ ed total vibration value and the

stated speciﬁ ed noise emission value can

also be used for a provisional assessment

of the load.

Warning: The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Try to keep the exposure to vibra-

tions as low as possible. Examples

of measures to reduce vibration

exposure are the wearing of gloves

when using the tool and limiting the

working hours. For this purpose all

parts of the operating cycle have to

be considered (for example, times

when the electric tool is switched

off and times when it is switched on

but running without any load).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PALP 20-Li B2 - IAN 317171-1904 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info