Bedienungsanleitung Parkside PASS 3.6 B2 - IAN 96266 (Seite 23 von 28) (Deutsch, Englisch, Holländisch)

576742

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

PASS 3.6 B2

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ . Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀ ect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power

tool for operations diﬀ erent from those intended

could result in a hazardous situation.

5. Use and handling of the cordless

electrical power tool

a) Charge a rechargeable battery unit using only

the charger recommended by the manufacturer.

Chargers are often designed for a particular

type of rechargeable battery unit. There is the

danger of ﬁ re if other types of rechargeable

battery units are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁ re.

c) When they are not being used, store recharge-

able battery units away from paperclips,

coins, keys. nails, screws or other small metal

objects that could cause the contacts to be

bridged. Short-circuiting the contacts of a

rechargeable battery unit may result in heat

damage or ﬁ re.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens,

avoid contact with the ﬂ uid. If contact occurs,

ﬂ ush the aﬀ ected area with water. Seek addi-

tional medical help if any of the ﬂ uid gets into

your eyes. Escaping battery ﬂ uid may cause

skin irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

6. Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Safety instructions speciﬁ cally for

cordless screwdrivers

■ Immobilise the workpiece securely. A

workpiece that is held in place with a clamp/

vice can be worked much more safely than a

workpiece held with the hand.

■ Hold the power tool ﬁ rmly. When tightening or

loosening screws, a high reaction moment can

quickly occur.

IB_96266_PASS3.6B2_LB1.indb 20IB_96266_PASS3.6B2_LB1.indb 20 23.12.13 17:0423.12.13 17:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PASS 3.6 B2 - IAN 96266 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PASS 3.6 B2 - IAN 96266

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info