Bedienungsanleitung Parkside PBS 600 A1 - IAN 96798 (Seite 28 von 34) (Deutsch, Englisch, Holländisch)

595409

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

28 GB

General power tool safety warnings General power tool safety warnings / Preparing for use

wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper foot-

ing and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from mov-

ing parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of dust collection

can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your applica

tion.

The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and / or the battery pack from

the power tool before making any ad-

justments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of un-

trained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other con-

dition that may affect the power tool’s

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations diﬀerent from those intended could

result in a hazardous situation.

5. Service

a) Have your power tool serviced by a

qualified repair person using only

iden-

tical replacement parts. This will ensure

that the safety of the power tool is maintained.

Safety advice for

belt sanders

Hold the device by the insulated han-

dle surfaces as the sanding belt could

strike the device’s own mains lead.

Damaging a live wire could result in the metal

parts of the device also becoming live and

could lead to an electric shock.

DANGER OF FIRE FROM FLYING SPARKS!

Sanding metal creates ﬂying sparks. For this

reason, always make sure that nobody is placed

in any danger and that there are no inﬂammable

materials near the working area.

When undertaking prolonged sanding of wood,

and in particular when working on materials

that give rise to dusts that are hazardous to

health, the sander must be connected to a

suitable external dust extraction device.

Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

The belt sander is designed for the dry sanding

of large surfaces of wood, plastic, metal and

plaster and painted surfaces. The device is to

be used for dry sanding only.

Do not sand materials containing asbestos.

Asbestos is a known carcinogen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PBS 600 A1 - IAN 96798 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PBS 600 A1 - IAN 96798

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info